Abstract:The strut structure directly affects the flow field characteristics and aerodynamic performance of the gas turbine exhaust diffuser. The effects of the strut profiles and strut skewed angles on the aerodynamic performance of the exhaust diffuser at different inlet pre-swirls were numerically investigated using three-dimensional Reynolds-Averaged Navier-Stokes(RANS) and Realizable k-ε turbulence model. The numerical static pressure recovery coefficient of the exhaust diffuser is in agreement with the experimental data well. The reliability of the numerical method for the exhaust diffuser performance analysis was demonstrated. Exhaust diffusers with four kinds of vertical strut profiles obtain the highest static pressure recovery coefficient at the inlet pre-swirl of 0.35. The similar static pressure recovery coefficient of exhaust diffusers with four kinds of vertical strut airfoils are observed when the inlet pre-swirl is less than 0.48. The static pressure recovery coefficient of exhaust diffusers with vertical b1 and b2 struts are higher than that with the a1 and a2 struts when the inlet pre-swirl is greater than 0.48. At the inlet pre-swirl of 0.35, The static pressure recovery coefficient of the exhaust diffuser with the a1 strut decreases with the increasing of the strut skewed angles. The static pressure recovery coefficient of the exhaust diffuser with the b1 strut increases with the increasing of the strut skewed angles, and the static pressure recovery coefficient increases by 3.6% compared with the vertical design when the skewed angle of b1 strut is 40[Formula: see text]. At the inlet pre-swirl of 0.64. The static pressure recovery coefficient of the exhaust diffuser with the a1 strut increases by 8.7% compared with the vertical design when the skewed angle of a1 strut is greater than 20°. In addition, the static pressure recovery coefficient of the exhaust diffuser with the b1 strut decreases by 3.8% compared with the vertical design when the skewed angle of b1 strut is 40°. The method to improve the aerodynamic performance of the exhaust diffuser by appropriate increase the strut maximum thickness and design the strut skewed angle is proposed in this work.

Analysis of Ground Effect Diffuser on a Race Car to Optimize Aerodynamic Performance

Numerical investigation on the effect of rear wing on aerodynamic performance of race car

Experimental analysis and design optimization of an empty diffuser for performance Enhancement in DAWT

Review of effects the rear spoiler aerodynamic analysis on ground vehicle performance

To study the Aerodynamic Effects of Spoiler of a Car (Sedan – Segment) using Computational Fluid Dynamics

Performance Analysis of Two-Dimensional Plane Diffusers at a Moderate Reynolds Number by Means of Unsteady RANS

On-Site Characterization of Automotive Diffuser Aerodynamics by 3D LPT

City Car Drag Reduction by Means of Shape Optimization and Add-On Devices

Effects of Struts Profiles and Skewed Angles on the Aerodynamic Performance of Gas Turbine Exhaust Diffuser

Aerodynamic Design and Performance Evaluation of Pipe Diffuser for Centrifugal Compressor of Micro Gas Turbine

Optimization of Inverted Double-Element Airfoil in Ground Effect using Improved HHO and Kriging Surrogate Model

CFD Analysis on Effect of Front Windshield Angle on Aerodynamic Drag

Performance and flow characteristics of a novel air bleeding aerodynamic combustor diffuser

Influence of the Diffuser on the Drag Coefficient of a Solar Car

Design and CFD Analysis of a Rear Wing of a Motorsport Car

Design, Testing, and Performance Impact of Exhaust Diffusers in Aero-Derivative Gas Turbines for Mechanical Drive Applications

Computational analysis of air jet wheel deflector for aerodynamic drag reduction of road vehicle

Computational fluid dynamics analysis for an active rear-wing design to improve cornering speed for a high-performance car

INVESTIGATION OF THE MAP WIDTH IMPROVEMENT IN A RADIALLY REDUCED DIFFUSER DESIGN CONCEPT FOR A CENTRIFUGAL COMPRESSOR

Evaluation of Various Flow Control Methods in Reducing Drag and Aerodynamic Heating on the Nose of Hypersonic Flying Objects

Optimization of aerodynamic drag reduction for vehicles with non-smooth surfaces and research on aerodynamic characteristics under crosswind