Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

A new technique for improving performance of conventional CRLH resonators using IDC/UISs with enhanced harmonic suppression in balanced dual-band BPFs

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

An Extended Doublet Substrate Integrated Waveguide (SIW) Bandpass Filter with a Complementary Split Ring Resonator (CSRR)

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

A 1.3–1.7-Ghz $Q$ -Enhanced Resonator-Based High-IF Bandpass Filter with 1.5%–67% Tunable Fractional Bandwidth in 65-Nm CMOS Process

A Novel 76 and 94ghz Dual Band Bandpass Filter Using Multilayer Step Impedance Resonators (Sirs)

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Compact dual-band balanced bandpass filter using CRLH resonator with intrinsic common-mode suppression and multiple transmission zeros

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Novel Balanced Single/Dual-band Bandpass Filters Based on Circular Patch Resonator

A Balanced Dual-Band BPF Based on C-CSRR with Improved Passband Selectivity

A Tunable Balanced Dual‐band BPF with Quasi‐independently Controlled Center Frequency and Bandwidth

Design of Hybrid Bandpass Filter Chips with High Selectivity and Wideband Using IPD and FBAR Technology

High‐performance balanced dual‐band bandpass filter with controllable bandwidth and frequency ratio

Balanced tri- and quad-band BPFs based on SIR with improved passbands selectivity

Dual-band bandpass filter using centrally coupled resonators (CCRs)

Synthesis Design of High Selectivity Wideband Balanced Bandpass Filter Based on Parallel Coupled Lines

High common‐mode rejection balanced bandpass filter using novel coupling scheme and source‐loaded coupling technique

A Hybrid Filter With Extremely Wide Bandwidth and High Selectivity Using FBAR Network

Synthesis Design of Equal-Ripple and Quasi-Elliptic Wideband BPFs with Independently Reconfigurable Lower Passband Edge

Novel Cross-Coupled Dual-Band Bandpass Filters With Compact Size Based on Dual-Mode Isosceles Right-Angled Triangular Resonators