Abstract:With the ongoing promotion and adoption of electric vehicles, intelligent and connected technologies have been continuously advancing. Electrical control systems implemented in electric vehicles have emerged as a critical research direction. Various drive-by-wire chassis systems, including drive-by-wire driving and braking systems and steer-by-wire systems, are extensively employed in vehicles. Concurrently, unavoidable issues such as conflicting control system objectives and execution system interference emerge, positioning integrated chassis control as an effective solution to these challenges. This paper proposes a model predictive control-based longitudinal dynamics integrated chassis control system for pure electric commercial vehicles equipped with electro–mechanical brake (EMB) systems, centralized drive, and distributed braking. This system integrates acceleration slip regulation (ASR), a braking force distribution system, an anti-lock braking system (ABS), and a direct yaw moment control system (DYC). This paper first analyzes and models the key components of the vehicle. Then, based on model predictive control (MPC), it develops a controller model for integrated stability with double-layer torque distribution. The required driving and braking torque for each wheel are calculated according to the actual and desired motion states of the vehicle and applied to the corresponding actuators. Finally, the effectiveness of this strategy is verified through simulation results from Matlab/Simulink. The simulation shows that the braking deceleration of the braking condition is increased by 32% on average, and the braking distance is reduced by 15%. The driving condition can enter the smooth driving faster, and the time is reduced by 1.5 s~5 s. The lateral stability parameters are also very much improved compared with the uncontrolled vehicles.

What problem does this paper attempt to address?

The paper mainly discusses the longitudinal and lateral stability control issues of electric commercial vehicles, and proposes a model predictive control strategy based on dual-layer torque distribution. With the popularity of electric vehicles and the advancement of intelligent technology, the research of vehicle control systems becomes crucial. Traditional distributed control architectures have problems with control objective conflicts and system interference, thus requiring the integration of chassis control strategies to address these issues. In the paper, the author designed a comprehensive control system that combines Acceleration Slip Regulation (ASR), brake force distribution system, Anti-lock Braking System (ABS), and Direct Yaw Moment Control (DYC). This system is aimed at pure electric vehicles equipped with electro-hydraulic mechanical brake systems, central drive, and distributed braking. It achieves precise calculation of driving and braking forces for each wheel through dual-layer torque distribution to adapt to the actual and desired motion states of the vehicle. Through the simulation results in Matlab/Simulink, the paper demonstrates that this strategy can significantly improve braking deceleration (average increase of 32%) and reduce braking distance (decrease of 15%) under braking conditions. It also enables faster entry into a stable driving state (reducing time by 1.5 to 5 seconds) under driving conditions and significantly improves the lateral stability parameters. The control strategy proposed in the paper includes dual-layer torque distribution, which avoids the mutual interference between longitudinal and lateral controllers and enhances the longitudinal and lateral stability of the vehicle by reallocating the control results of the lateral controller. In addition, this strategy considers the high coupling of steering and braking systems, aiming to achieve comprehensive control of lateral offset and longitudinal slip of the vehicle through the joint action of multiple controllers. In conclusion, the problem addressed by this paper is how to enhance the longitudinal and lateral stability of electric commercial vehicles during driving, especially during braking and steering, to improve driving safety and comfort through innovative control strategies.

An NMPC-Based Integrated Longitudinal and Lateral Vehicle Stability Control Based on the Double-Layer Torque Distribution

Integrated Control for Four-Wheel-Independent-Drive EVs' Lateral Stability and Rollover Prevention

Active Safety Control of Automated Electric Vehicles at Driving Limits: A Tube-Based MPC Approach

Integrated Longitudinal and Lateral Vehicle Stability Control for Extreme Conditions With Safety Dynamic Requirements Analysis

NMPC-based controller for vehicle longitudinal and lateral stability enhancement under extreme driving conditions

Coordinated Attitude Control of Longitudinal, Lateral and Vertical Tyre Forces for Electric Vehicles Based on Model Predictive Control.

Coordinated Longitudinal and Lateral Stability Improvement for Electric Vehicles Based on a Real-Time NMPC Strategy

Model predictive control for integrated longitudinal and lateral stability of electric vehicles with in‐wheel motors

Model Predictive Control for integrated lateral stability, traction/braking control, and rollover prevention of electric vehicles

Coordinated longitudinal and lateral vehicle stability control based on the combined-slip tire model in the MPC framework

Modular Integrated Longitudinal, Lateral, and Vertical Vehicle Stability Control for Distributed Electric Vehicles

Model Predictive Control of Active Suspension for an Electric Vehicle Considering Influence of Braking Intensity

Longitudinal Collision Avoidance and Lateral Stability Adaptive Control System Based on MPC of Autonomous Vehicles

Distributed Drive Electric Vehicle Handling Stability Coordination Control Framework Based on Adaptive Model Predictive Control

Robust Control of Regenerative and Hydraulic Brakes for Enhancing Directional Stability of an Electric Vehicle During Straight-Line Braking

New Integrated Vehicle Stability Control of Active Front Steering and Electronic Stability Control Considering Tire Force Reserve Capability

Interacting multiple model-based yaw stability control for distributed drive electric vehicle via adaptive model predictive control algorithm

A Safety Requirements Adaptive NMPC Strategy for Electric Vehicle Stability Control with Computationally Efficient Optimization

Real-Time Nonlinear Predictive Controller Design for Drive-by-wire Vehicle Lateral Stability with Dynamic Boundary Conditions

Evaluating Model Predictive Path Following and Yaw Stability Controllers for Over-Actuated Autonomous Electric Vehicles.

Yaw Stability Of Four-Wheel-Drive Electric Vehicle Based On Multi-Model Predictive Control