Abstract:Physisorption-driven removal of acetylene (C2H2) from ethylene (C2H4) is a promising pathway to produce polymer-grade C2H4. However, advances have been constrained by the compromise needed between selectivity and adsorption capacity. Herein, physisorption-mediated separation of trace C2H2 from C2H4 was carefully examined over pillared metal-organic frameworks (MOFs) through a combination of experiments and theoretical calculations, disclosing that concurrent enhancement of C2H2 uptake capacity and selectivity under low C2H2 pressure conditions was observed due to pore-environment engineering of MOFs. Compared to its counterparts including -H and -NH2, the -CH3-functionalized MOF, named ZU-901, could achieve the highest separation performance, delivering a C2H2 uptake capacity of 0.57 mmolg(-1) at 0.01 bar and an ideal adsorbed solution theory selectivity of ca. 83 for a mixture of C2H2 and C2H4 with a volumetric ratio of 1:99 (1% C2H2/99% C2H4 (V/V)) at 298 K. Their efficiency for C2H2/C2H4 separation, especially in the low-pressure range, was demonstrated by dynamical breakthrough experiments, where the breakthrough time reached 220 ming(-1) under a 1% C2H2/99% C2H4 (V/V) flow rate of 2 mL min(-1). Theoretical calculations pointed out that ZU-901 with ligand functionalization has the optimized pore environment and aperture size, boosting the selectively accommodated C2H2 via the synergetic effect of OH(HC equivalent to) and H(H(2)pzdc, -CH3)C(C equivalent to) interactions between C2H2 molecules and frameworks. This work presents an example of pore-environment optimization to break the selectivity-capacity trade-off toward the purification of C2H4 by the removal of C2H2.

Efficient Separation of Acetylene-Containing Mixtures Using ZIF-8 Membranes

Mixed Matrix Membranes for C2H4/C2H6 Separation Using a Phosphate Anion-Pillared Microporous Material

Defect-free Mixed-Matrix Membranes Consisting of Anion-Pillared Metal-Organic Frameworks and Poly(ionic Liquid)s for Separation of Acetylene from Ethylene

Pore-Environment Engineering of Pillared Metal–Organic Frameworks for Boosting the Removal of Acetylene from Ethylene

Stiff Metal–organic Framework–polyacrylonitrile Hollow Fiber Composite Membranes with High Gas Permeability

Self-assembly of defect-free polymer-based zeolite imidazolate framework composite membranes with metal-phenolic networks for high efficient H<sub>2</sub>/CH<sub>4</sub> separation

Highly permeable ZIF-8 membranes for C2H4/C2H6 separation in a wide temperature range

Improved propylene/propane separation performance under high temperature and pressures on in-situ ligand-doped ZIF-8 membranes

Controllable synthesis of ZIF-8 interlocked membranes for propylene/propane separation

MOF‐COF “Alloy” Membrane for Efficient Propylene/Propane Separation

ZIF-L Membrane with a Membrane-Interlocked-support Composite Architecture for H2/CO2 Separation

Enhanced Propylene/Propane Separation via Aniline‐Decorated ZIF‐8 Membrane: Lattice Rigidity Adjustment and Adsorption Site Introduction

Fluorocarboxylic acid‐modified MOF‐808 with enhanced acetylene adsorption capacity and C2H2/C2H4 separation performance

Ultrathin Low‐Crystallinity MOF Membranes Fabricated by Interface Layer Polarization Induction

Flexible Polypropylene-Supported ZIF-8 Membranes for Highly Efficient Propene/Propane Separation.

Ultrafast Semi‐Solid Processing of Highly Durable ZIF‐8 Membranes for Propylene/Propane Separation

Highly efficient separation of C2H2 from CO2 and C2H4 enabled by an anion-pillared metalloporphyrin MOF with sandwich-like binding sites

Acetylene Separation by a Ca-MOF Containing Accessible Sites of Open Metal Centers and Organic Groups

Polycrystalline metal-organic framework (MOF) membranes for molecular separations: Engineering prospects and challenges

MOF-derived nanocomposites functionalized carbon molecular sieve membrane for enhanced ethylene/ethane separation

Highly Selective Separation of C2H2/CO2 and C2H2/C2H4 in an N-Rich Cage-Based Microporous Metal-Organic Framework