Abstract:The separation of C3 olefin and paraffin, which is essential for the production of propylene, can be facilitated by the ZIF-8 membrane. However, the commercial application of the membrane has not yet been achieved because the fabrication process does not meet industrial regulatory criteria. In this work, we provide a straightforward and cost-effective membrane fabrication technique that permits the rapid synthesis of ZIF-8 hollow fiber membranes. The scalability of the technology was confirmed by the incorporation of three ZIF-8 hollow fiber membranes into a single module using an introduced fiber mounting methodology. The molecular sieving characteristics of the ZIF-8 membrane module on a binary combination of C3 olefin and paraffin (C3H6/C3H8 selectivity of 110 and a C3H6 permeance of 13 GPU) were examined at atmospheric conditions. In addition, the high-pressure performance of these membranes was demonstrated at a 5 bar of equimolar binary feed pressure with a C3H6/C3H8 selectivity of 55 and a C3H6 permeance of 9 GPU due to propylene adsorption site saturation. To further accurately portray the separation performance of the membrane on an actual industrial feed, the effect of impurities (ethylene, ethane, butylene, i-butane, and n-butane), which can be found in C3 splitters, was investigated and a considerable decrement (~15%) in the propylene permeance upon an interaction with C4 hydrocarbons was confirmed. Finally, the long-term stability of the ZIF-8 membrane was confirmed by continuous operation for almost a month without any loss of its initial performance (C3H6/C3H8 separation factor of 110 and a C3H6 permeance of 13 GPU). From an industrial point of view, this straightforward technique could offer a number of merits such as a short synthesis time, minimal chemical requirements, and excellent reproductivity.

Highly permeable ZIF-8 membranes for C2H4/C2H6 separation in a wide temperature range

Mixed Matrix Membranes for C2H4/C2H6 Separation Using a Phosphate Anion-Pillared Microporous Material

Highly durable ZIF-8 tubular membranes via precursor-assisted processing for propylene/propane separation

Efficient Separation of Acetylene-Containing Mixtures Using ZIF-8 Membranes

Zeolite Imidazolate Framework Membranes on Polymeric Substrates Modified with Poly(vinyl Alcohol) and Alginate Composite Hydrogels.

Sub-Zero Temperature Synthesis of Pressure-Resistant ZIF-8 Membrane with Superior C 3 H 6 /C 3 H 8 Separation Performance

Ultrathin ZIF‐8 Membrane through Inhibited Ostwald Ripening for High‐Flux C3H6/C3H8 Separation

Facile Fabrication of α-Alumina Hollow Fiber-Supported ZIF-8 Membrane Module and Impurity Effects on Propylene Separation Performance

Ultrafast Semi‐Solid Processing of Highly Durable ZIF‐8 Membranes for Propylene/Propane Separation

Controllable synthesis of ZIF-8 interlocked membranes for propylene/propane separation

Towards ZIF-8 membranes with superb C3H6/C3H8 separation performances under varying conditions: Necessity of precise temperature control

Epitaxial supercritical fluid processing of ZIF-8 membranes towards efficient C3H6/C3H8 separation

Self-assembly of defect-free polymer-based zeolite imidazolate framework composite membranes with metal-phenolic networks for high efficient H<sub>2</sub>/CH<sub>4</sub> separation

ZIF-8 membranes prepared at miscible and immiscible liquid–liquid interfaces

Metal-Organic Framework Channelled Graphene Composite Membranes for H-2/Co2 Separation

Carbon nanotube supported oriented metal organic framework membrane for effective ethylene/ethane separation

Microstructure Manipulation of MFI-type Zeolite Membranes on Hollow Fibers for Ethanol–water Separation

ZIF-L Membrane with a Membrane-Interlocked-support Composite Architecture for H2/CO2 Separation

Ultrathin Low‐Crystallinity MOF Membranes Fabricated by Interface Layer Polarization Induction

Coupling atomic layer deposition with supercritical fluid processing to provide a highly C3H6‐selective ZIF‐8 membrane

High selectivity ZIF-93 hollow fiber membranes for gas separation