Abstract:The development of perovskite solar cells (PSCs) has progressed rapidly because of their high efficiency and low cost. The performance of PSCs is predominantly determined by the quality of the perovskite films, which is controlled by the fabrication process. The comprehensive and in-depth understanding of the nucleation, crystallization, and growth process are imperative for the further advancement of large-scale manufacturing of high-quality perovskite films. In this work, the simple process parameters of perovskite thin films were systematically optimized at ambient air, such as containing the thickness of the perovskite thin film, the anti-solvent bath, and the thermal annealing time. Through these simple processes, the wet film, solvent volatilization, and crystallization of perovskite films can be controlled and optimized. After optimizing the spraying conditions, the champion power conversion efficiency (PCE) of the PSCs achieved 20.6% (reverse scan) and had little hysteresis in the current density–voltage (J–V). In addition, the unsealed device retained 85% of its original PCE and showed excellent long-term stability after 650 h of storage in the drying tower.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01129?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01129</a>.VTFL equation for SCLC, SCLC curves of spray-coated perovskite films with different thicknesses, microscopic pictures of perovskite films prepared based on different solvent ratios of DMF to NMP and different anti-solvents, optical photos of perovskite films prepared based on different solvent ratios of DMF to NMP and different anti-solvents, top view of AFM images for the spray-coated perovskite film of different anti-solvent processing times, J–V curves of 1 cm2 PSC on the rigid substrate prepared by the ultrasonic spraying method, and the PCE distribution histogram of rigid PSCs based on 18 devices (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01129/suppl_file/ae0c01129_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Quantitative Surface Passivation Through Drop‐on‐Demand Inkjet Printing Enables Highly Efficient Perovskite Solar Cells

Synergistic Effects of the Physical Modification and Chemical Passivation Enabling Efficient Perovskite Solar Cells

Passivation of perovskite surfaces using 2-hydroxyacetophenone to fabricate solar cells with over 20.7% efficiency under air environment

Ambient Inkjet‐Printed High‐Efficiency Perovskite Solar Cells: Manipulating the Spreading and Crystallization Behaviors of Picoliter Perovskite Droplets

Scalable Slot-Die Coating of Passivation Layers for Improved Performance of Perovskite Solar Cell Modules.

Suppressing surface and interface recombination to afford efficient and stable inverted perovskite solar cells

Dual Role of Rapid Transport and Efficient Passivation in Inverted Methylammonium‐Free Perovskite Solar Cells Utilizing a Self‐Assembled Porous Insulating Layer

Perovskite solar cells based on screen-printed thin films

Enhanced charge carrier transport and defects mitigation of passivation layer for efficient perovskite solar cells

Air‐Processed Perovskite Solar Cells with >25% Efficiency and High Stability Enabled by Crystallization Modulation and Holistic Passivation

A Highly Tolerant Printing for Scalable and Flexible Perovskite Solar Cells

Sodium Dodecylbenzene Sulfonate Interface Modification of Methylammonium Lead Iodide for Surface Passivation of Perovskite Solar Cells

Reducing the Surface Reactivity of Alkyl Ammonium Passivation Molecules Enables Highly Efficient Perovskite Solar Cells

Surfactant-controlled ink drying enables high-speed deposition of perovskite films for efficient photovoltaic modules

Anti‐Solvent‐Free Fabrication of Stable FA0.9Cs0.1PbI3 Perovskite Solar Cells with Efficiency Exceeding 24.0% through a Naphthalene‐Based Passivator

Synergistic Interface Layer Optimization and Surface Passivation with Fluorocarbon Molecules toward Efficient and Stable Inverted Planar Perovskite Solar Cells

Zwitterionic-Surfactant-Assisted Room-Temperature Coating of Efficient Perovskite Solar Cells

Efficient Bifacial Passivation Enables Printable Mesoscopic Perovskite Solar Cells with Improved Photovoltage and Fill Factor

Direct Surface Passivation of Perovskite Film by 4-Fluorophenethylammonium Iodide toward Stable and Efficient Perovskite Solar Cells

High Efficiency over 20% of Perovskite Solar Cells by Spray Coating via a Simple Process

Surface Passivation Using N-Type Organic Semiconductor by One-Step Method in Two-Dimensional Perovskite Solar Cells