Abstract:Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, Ahead of Print. In this paper, to address the shortcomings of the crossing structure design based on the elastic bending center method and the lack of related research, an optimization method for high-speed turnout crossing structures was proposed based on the actual elastic deformations of point and splice rails. Based on the finite element theory, the actual loading characteristics and spatial variable section characteristics of point and splice rails were fully considered, and a refined simulation analysis model of the switching system of point and splice rails in crossing areas was established. Moreover, the elastic deformation lines of point and splice rails in the nonworking state were obtained for the first time, which were consistent with actual situations. On this basis, system optimization was performed for the connecting parts of the crossing with a movable point in a high-speed turnout. In the crossing structure simulation model, the length adjustment values of the first–sixth spacer blocks between the branch line–wing and point rails and between the mail line–wing splice rails were ≤1 mm. Moreover, the lengths of the seventh–ninth spacer blocks decreased by gradually increasing amounts, and the length of the ninth spacer block decreased the most (∼6 mm). The length of the second spacer block between the point and splice rails slightly increased, but the length of the third spacer block significantly decreased by 6 mm. The length adjustment value of the distance block between the point and splice rails was smallest (0.7 mm). The calculated optimal lengths of the connecting parts of the crossing were found to be close to the empirical values used in actual manufacturing processes, and the dimension optimization patterns were completely consistent with actual situation, which validates the proposed optimization method. Thus, the proposed method can effectively improve the coordination between rails and connecting parts in crossing areas, substantially reduce internal stresses in crossing systems, and improve their assembly performance and service life. Moreover, the proposed optimization parameters can provide valuable references for the research on next-generation high-speed turnouts (400 km/h) and for improving the designs of existing high-speed turnouts.

Optimisation of turnout rail profiles based on equivalent conicity

Optimization of Rail Profiles to Improve Vehicle Running Stability in Switch Panel of High-Speed Railway Turnouts

Dynamic Responses of Ballastless High-Speed Railway Due to Train Passage with Excitation of Uneven Trackbed Settlement

Development and application of a calculation method for the equivalent conicity in high-speed turnout Zones

An optimised grinding target profile considering long-term service performance: A case study of no. 18 high-speed turnout

Analytical representations of inherent structural irregularities in turnout crossing with moveable point

Impact of wheel profile evolution on wheel-rail dynamic interaction and surface initiated rolling contact fatigue in turnouts

Optimization of rail profile design for high-speed lines based on Gaussian function correction method

Rail profile optimization of a subway's sharp curve considering multiple curve sections and metal removal

A novel three-dimensional wheel–rail contact geometry method in the switch panel considering variable cross-sections and yaw angle

Investigating the effect of rail profile deviation on hunting instability of high-speed railway vehicle under multi-parameter coupling

Multiobjective optimisation of rail profile at high speed

Impact of wheel profile evolution on the lateral motion characteristics of a high-speed vehicle navigating through turnout

Dynamic wheel-rail interaction of a train crossing a turnout under traction/braking behaviour and research on rail wear of the turnout

Wheel profile optimization for intercity EMUs based on the Gaussian function correction method

Multi-objective optimisation of high-speed rail profile with small radius curve based on NSGA-II Algorithm

Study on the optimization of high-speed turnout crossing structures based on actual elastic deformation of point and splice rails

Optimisation of wheel profile of variable gauge high-speed trains

Investigation of transient wheel-rail interaction and interface contact behaviour in movable-point crossing panel

Research on the longitudinal mechanical behaviours of subway turnouts of large slope under train braking force

Study of Problems Related to Laying Ballastless Track in the Turnout of Ballasted Track at High-Speed Railway Stations