Abstract:Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, Ahead of Print. In order to effectively address the engineering problem of optimizing the worn rail profile on subway sharp-radius curves, this paper focuses on the inconsistent wear characteristics of rails on such curves. The contact stress, wheel-rail lateral force, and wear index are taken as objective functions, and key rail profiles at the points of straight-transition, transition-curve, curve-midpoint, circular-transition, and transition-straight are selected. A multi-objective and multi-section optimization scheme based on the optimized limit curve is proposed to design the grinding profile for rails on subway sharp-radius curves. In order to compare its optimization effectiveness, two additional optimization schemes are presented: the second scheme involves multi-section profile optimization with no optimized limit curve as constraints, and the third scheme deals with optimizing a single profile for grinding with equal cross-sections. Through a comparison of the three optimization schemes, the results indicate that all three schemes lead to a reduction in the contact stress, wheel-rail lateral force, and wear index of the outer and inner stock rails after optimization. Scheme 1 shows a more extensive and uniform distribution of wheel-rail contact points, with larger reductions in contact stress and increases in contact area. Scheme 3 only improves contact in severely worn sections, while in less worn sections, the contact distribution becomes concentrated, accelerating wear evolution. Furthermore, in Scheme 1, the cumulative wear after 100,000 and 200,000 cycles is reduced by a maximum of 8.44% and 22.33% compared to before optimization, making it the most effective among the three schemes. Therefore, the optimized profile output by the optimization method proposed in this paper is considered the best solution, which is represented by Scheme 1.

Multiobjective optimisation of rail profile at high speed

Multi-objective optimisation of high-speed rail profile with small radius curve based on NSGA-II Algorithm

Optimization of rail profile design for high-speed lines based on Gaussian function correction method

Optimisation of wheel profile of variable gauge high-speed trains

An optimised grinding target profile considering long-term service performance: A case study of no. 18 high-speed turnout

Optimizing the Rail Profile for High-Speed Railways Based on Artificial Neural Network and Genetic Algorithm Coupled Method

Optimal profile design for rail grinding based on wheel–rail contact, stability, and wear development in high-speed electric multiple units

Rail profile optimization of a subway's sharp curve considering multiple curve sections and metal removal

Multi-objective optimisation of a metro wheel profile to reduce wheel flange wear and RCF considering the distribution density of wheel−rail contact points

Suspension parameter optimal design to enhance stability and wheel wear in high-speed trains

Multi-objective optimisation of wheel-rail adhesion for high-speed trains with aerodynamic lift wings

Dynamic parameters optimization of straddle-type monorail vehicles based multiobjective collaborative optimization algorithm

Optimization of Rail Profiles to Improve Vehicle Running Stability in Switch Panel of High-Speed Railway Turnouts

Numerical and experimental investigation of the wheel/rail interaction and dynamics for a high-speed gauge-changeable railway vehicle

Multi-objective Optimization of High-Speed Train Running Speed Trajectory Based on Particle Swarm and NSGA-II Fusion Algorithm

Multi-objective optimization for switch rail declining values of rail expansion joint on cable-stayed bridge

Optimization design for aerodynamic elements of high speed trains

Wheel profile optimization for intercity EMUs based on the Gaussian function correction method

Multi-parameter and multi-objective optimisation of articulated monorail vehicle system dynamics using genetic algorithm

Research on parameter optimization based on multi-body dynamics model of monorail vehicle aiming at reducing running wheel wear

Research of operation mode of high-speed trains on the effect of rail wear evolution law