Quasi-3D slope stability analysis of waste dump based on double wedge failure

Chong Chen,Huayong Lv,Zhanbo Cheng,Xu Gao,Xinnan Cui,Xingtong Yue
DOI: https://doi.org/10.1038/s41598-024-56637-7
IF: 4.6
2024-03-24
Scientific Reports
Abstract:The double wedges sliding along the weak layer of the foundation can be observed on the slope of the waste dump and the sliding body is divided into the active wedge and passive wedge by the weak foundation and the failure surfaces of the waste dump. Because the conventional limit equilibrium slice method cannot reflect the polygonal slip surface of the slope of the waste dump with weak foundation, this study proposed a double wedge calculation method for the slope of the waste dump with weak foundation. The limit equilibrium analysis is performed on double wedges by considering the direction and values of the interaction force between double wedges to obtain the safety factor of the slope of the waste dump. Meanwhile, the quasi-3D double wedges stability analysis method of the waste dump slope with weak foundation is proposed by considering the influence of the geometry and sliding direction of the slope surface on the slope stability. The safety factor of the inverted dump slope is 0.82, the volume of the sliding body is 6.43 million m 3 , and the main sliding direction is 20° south by east. The shear strain rate cloud diagram of the section is 'y' type distribution, and the sliding body is divided into two independent blocks. The safety factor of the sliding body section obtained by the double wedge method is between 0.76 and 0.92, and the closer to the boundary of the sliding body, the greater the safety factor of the section. The quasi-three-dimensional safety factor obtained by theoretical analysis is 0.817. The results show that the calculation results of quasi-3D double wedge are basically consistent with the calculation results of strength reduction method, while the proposed method is simpler. It can be used as a quick method to evaluate slope stability in engineering practice.
multidisciplinary sciences
What problem does this paper attempt to address?
The paper primarily focuses on addressing the stability analysis of waste dumps under weak foundation conditions. Specifically, the authors propose a quasi-3D double-wedge stability analysis method to better assess the stability of waste dumps. ### Problems the Paper Attempts to Solve: 1. **Limitations of Traditional Limit Equilibrium Slice Method**: The traditional limit equilibrium slice method cannot accurately reflect the polygonal sliding surface of waste dumps under weak foundation conditions. 2. **Proposing a New Double-Wedge Calculation Method**: The study proposes a new double-wedge calculation method to handle waste dumps under weak foundation conditions, considering the interaction forces and their directions between the double wedges. 3. **Quasi-3D Double-Wedge Stability Analysis Method**: By dividing the sliding body into strips along the sliding direction and using the safety factor of the intermediate section to replace the safety factor of the entire strip, the safety factor of the 3D slope body is obtained. 4. **Quick Assessment Method in Engineering Practice**: This method can serve as a simple and quick way to assess the stability of 3D slope bodies in engineering practice. ### Main Contributions: - Proposed a double-wedge analysis method suitable for waste dumps under weak foundation conditions. - Developed a quasi-3D double-wedge stability analysis method that can more accurately assess the stability of slope bodies. - Validated the effectiveness and accuracy of this method through numerical simulations and compared the results with those of the strength reduction method, proving its consistency.