Abstract:A simplified numerical method was proposed for computing the slip-line field, as well as the associated earth-pressure coefficient, in a cohesionless backfill with an inclined surface lying behind an inclined rough wall. The potential failure zone, in either active or passive cases, was divided into the Rankine zone, which was rigorously obtained by the theory of plasticity, and the transition zone being further divided into a series of triangular slices. Within the transition zone, the theoretical relationship between the inclination of the interslice force and that of the slip surface was established by satisfying the Mohr-Coulomb failure criterion, and equations involving the forces on a typical slice were formulated in accordance with the force and moment equilibrium conditions. An iterative procedure was presented for computing the lateral forces on the wall by adjusting the inclination of the slip surface until the stress condition on the upper boundary of the transition zone was satisfied, resulting in the two families of slip lines. Several examples demonstrate the slip-line field configurations, and the computed earth-pressure coefficients were found to agree fairly well with those of other numerical methods. Practical Applications The determination of earth pressures and the associated critical failure surface play an important role in the design of retaining walls and other problems of geotechnical engineering. Conventional methods are frequently used for this purpose, but the errors involved are sometimes unacceptably large in cases of inclined rough walls. Hence, certain numerical methods have been employed, which, despite their sophistication, have not yet approached exact solutions. This paper presents a simplified numerical procedure for approaching theoretical slip-line fields and earth-pressure coefficients for the most frequently encountered cases of inclined rough walls with inclined cohesionless backfills. With this method, no assumptions need to be made about the shape of the slip surface or the inclinations of the forces acting on the boundaries of the triangular slices, into which the potential slip zone is divided. Furthermore, both the stress equilibrium condition and the Mohr-Coulomb criterion were completely satisfied within the failure zone and on its boundaries. An effective iterative procedure was provided for determining the slip surface location, which converged rapidly, resulting in an approximately theoretical configuration of slip-line field and associated earth-pressure coefficient values if a sufficiently large number of triangular slices were employed.

开挖作用下滑剪破坏下盘边坡扰动范围计算及稳定性评价方法

Numerical Simulation of Dynamic Damage and Stability of a Bedding Rock Slope under Blasting Load

Study on the Crack Mechanism and Back Analysis of Mechanics Parameters of the Soil Slope in the New Area of MaGang

Deep-Seated Slope Failures Induced by Inappropriate Cutting in China

Failure mechanism and stability analysis of an open-pit slope under excavation unloading conditions

Discrete Element Simulation Analysis of the Bending and Toppling Failure Mechanisms of High Rock Slopes

Field measurement and failure forecast during the remediation of a failed cut slope

New Method for Computing Slip-Line Fields and Earth-Pressure Coefficients in Cohesionless Backfills

Disturbance range characterization and reinforcement design method of concealed bedding slope

Development of a probabilistic block theory analysis procedure and its application to a rock slope at a hydropower station in China

Numerical stability assessment of a mining slope using the synthetic rock mass modeling approach and strength reduction technique

Unloading damage patterns of rock slopes in open pit mines and analyses of their mechanisms

Quasi-3D slope stability analysis of waste dump based on double wedge failure

Stability Analysis of an Unstable Slope in Chongqing Based on Multiple Analysis Methods

Three-dimensional stability calculation method for high and large composite slopes formed by mining stope and inner dump in adjacent open pits

Study on the slope stability of the mine dumping site in Dailibaoqing village

Stability and probabilistic assessment of a large asymmetric bedding slope with a weak interlayer

Discrete element-based numerical simulation and failure mechanism analysis of anti-dip rock slopes

Investigating Toppling Failure Mechanism of Anti-dip Layered Slope due to Excavation by Physical Modelling

Force and deformation response analysis of dual structure slope excavation and support

Modeling Strip Footings on Slopes Using the Material Point Method