Abstract:Ball milled Mn-Al powders are ideal raw materials for fabricating bonded Mn-Al permanent magnets, and selecting proper precursor phase and milling medium for ball milling are of great importance to realize optimal magnetic properties in the final magnets. In this work, we studied the effect of different precursors and mediums of ball milling on the magnetic properties in the bonded magnets and the corresponding microstructural origins. ε-phase as the precursor leads to a serious decomposition behavior during the subsequent annealing after ball milling, resulting in a strong reduction in magnetization in the powders but just slightly better coercivity, so τ-phase is a superior choice as the precursor. In the case that τ-phase is adopted as the precursor, the milling medium of ethanol (wet-milling) or argon (dry-milling) has a remarkable influence on the morphologies of the milled powders. The former condition can fabricate thin polycrystalline flakes, and form stronger texture inside simultaneously, while the latter condition produces isotropic polycrystalline particles. The bonded magnets prepared using wet-milled powders thoroughly show superior magnetic properties including magnetization, remanence and coercivity than the magnets based on dry-milled particles. This work may promote the understanding of the nanostructures of Mn-Al ball milled powders, and provide the reference for the fabrication of Mn-Al rare-earth-free bonded magnets.Prime Novelty StatementBall milled Mn-Al powders are ideal raw materials for fabricating bonded Mn-Al permanent magnets, and selecting appropriate precursors and milling mediums for ball milling are important to obtain optimal magnetic properties in bonded magnets. In this work, ball milling with two precursors, ε phase (high temperature phase) and τ phase (metastable ferromagnetic phase), are performed. Powders from τ-precursor after annealing treatment showing good properties (M1200kA/m of 73 Am2/kg and HC of 250 kA/m). While for ε-precursor, during the subsequent annealing treatment for the transformation from ε to τ, obvious decomposition occurs, inducing the distinct magnetization deterioration (36 Am2/kg) as well as slightly higher coercivity (331 kA/m). In comparison, the τ-precursor is superior to ε-precursor. In case that τ-phase is adopted as the precursor, the milling medium of ethanol (wet-milling) and argon (dry-milling) has a remarkable influence on the morphologies of the milled powders. Wet-milling condition can fabricate polycrystalline thin flakes with stronger texture, while the dry-milling condition produces isotropic particles. The bonded magnets prepared using wet-milled powders thoroughly show superior magnetic properties including magnetization, remanence and coercivity than the magnets based on dry-milled particles. This work may promote the understanding of the nanostructures of Mn-Al ball milled powders, and provide the reference for the fabrication of Mn-Al rare-earth-free bonded magnets.

Effect of phase purity on enhancing the magnetic properties of Mn-Bi alloy

Effects of Mg and Sb Substitution on the Magnetic Properties of Magnetic Field Annealed MnBi Alloys

Synthesizing the Hard Magnetic Low-Temperature Phase of MnBi Alloy: Challenges and Prospects

Magnetic Properties of the MnBi Intermetallic Compound

Effect of Mg content on the microstructure and magnetic properties of rare-earth-free MnBi alloys

Microstructure and magnetic properties of MnBi powders prepared by various ball milling processes

Preparation and Magnetic Properties of Mnbi

Effect of Heat Treatment and Ball Milling on MnBi Magnetic Materials

Transformation of in-plane to out-of-plane anisotropy in MnBi alloy for permanent magnet application: a First-principles study

Effect of Fe doping on the magnetic properties of MnBi alloy

Effects of quenching on the microstructure and magnetic properties of MnBi nanopowders synthesized by low-oxygen induction thermal plasma

Engineering microstructure to improve coercivity of bulk MnBi magnet

Magnetic Properties of the Anisotropic MnBi/Sm2Fe17Nx Hybrid Magnet

Effects of Sn addition on the microstructure and magnetic properties of MnBi bulk magnets

Synthesis of hard magnetic α-MnBi phase by high pressure torsion and field assisted annealing

Crystal Structure, Magnetic Properties and Electronic Structure of the MnBi Intermetallic Compound

Temperature dependences of structure and coercivity for melt-spun MnBi compound

Anisotropic Nanocrystalline Mnbi with High Coercivity at High Temperature

Tailoring precursor and medium of ball milling to optimize magnetic properties in Mn-Al bonded permanent magnets

A core-shell magnet Mn70Bi30grown at seeds in magnetic fields and its impacts on its spin-dynamics, Curie point and other tailored properties

Study on properties of MnAlC magnetic powder and bulk