Abstract:<p>Billions of wireless sensing devices must be powered for IoT applications. Collecting energy from the ambient environment to power sensor nodes is a promising solution. Solar energy has been one of the main sources of ambient energy due to its availability, higher power density, and the maturity of the solar photovoltaic industry. However, there are many scenarios (indoor environment, outdoor environment during nighttime, poor weather conditions, underground, etc) where ambient solar energy is either not available or not sufficient for practical applications. For such scenarios, other renewable sources of energy must be sought. Typically, not enough power is collected from one ambient source to charge sensor nodes for continuous operation. In this work, we present a multi‐source energy harvester that collects RF and thermal energy (both available 24 hours) from the ambient environment simultaneously. The RF energy harvester is multi‐band and collects power from GSM (900, 1800 MHz) and 3G (2100 MHz). The thermal harvester converts diurnal temperature fluctuations to electrical energy using high thermal effusivity phase change material. Extensive field testing has been performed in three different conditions—outdoors, indoors, and buried underground—to highlight the usefulness of the multi‐source energy harvester in all these environments. When one source is disabled, the harvester still generates energy from the remaining active source and can enable continuous operation of futuristic IoT sensors. As a proof of concept, a real‐world IoT application is demonstrated, where temperature and humidity sensors are powered by the multi‐source energy harvester. Continuous robust operation of the sensors and wireless data transmission after each 3.7 seconds are expected when both harvesters operate in full mode. Scenarios, where only single thermal energy harvester or only single RF energy harvester operates, are also demonstrated and data transmission with average time intervals of 30 seconds and 9 minutes is achieved, respectively.</p>

A wireless sensing platform utilizing ambient RF energy

Wi-Fi RF Energy Harvesting for Battery-Free Wearable Radio Platforms

A 11 Mw 2.4 GHz 0.18 Μm CMOS Transceivers for Wireless Sensor Networks

A Compact RF Energy Harvesting Wireless Sensor Node with an Energy Intensity Adaptive Management Algorithm

Towards Battery-Free Wireless Sensing via Radio-Frequency Energy Harvesting

Radio Frequency Energy Harvesting for Underground Sensor Nodes: Possibilities and Challenges

A Wireless Temperature Sensor Powered By A Piezoelectric Resonant Energy Harvesting System

Wireless Communications with RF-Based Energy Harvesting: from Information Theory to Green Systems

Multi‐source ambient energy harvester based on RF and thermal energy: Design, testing, and IoT application

Data acquisition with RF-based energy harvesting sensor: From information theory to green system

A Switch Type RF Energy Harvesting and Management System

Quad-Band Rectenna for Ambient Radio Frequency (RF) Energy Harvesting

Development of 2400-2450 MHz Frequency Band RF Energy Harvesting System for Low-Power Device Operation

Dual-band RF energy harvesting for low-power IoT devices

Multisource Energy Harvesting System for a Wireless Sensor Network Node in the Field Environment

RF Energy Harvesting System Based on an Archimedean Spiral Antenna for Low-Power Sensor Applications

WiSensor: Passive Sensor Data Transmission by Way of Ambient Wi-Fi Channels

Energy Harvesting Chip and the Chip Based Power Supply Development for a Wireless Sensor Network

Sensing With Wireless Power and Data Transfer—Design of a Multisensor Augmented RFID

Maintenance-free Wireless Multi-Functional Sensing Enabled by Electrostatic Generator

Using Human Body As a Monopole Antenna for Energy Harvesting from Ambient Electromagnetic Energy