Abstract:There is an urgent need in surface mount technology (SMT) for a nontoxic, reusable and low temperature bonding technique which can afford good mechanical support as well as electrical contact. Meanwhile in the nanotechnology, many excellent and unique structure-related properties such as the high mechanical strength, the high conductivity and the adhesion ability of gecko feet have been studied. Our lab proposes a new patterned structure of Au nanowire array named nanowire surface fastener (NSF), which cold bonding for surface mount technology can be realized at room temperature. Then various methods have been developed to fabricate nanowire, such as arc discharge, catalytic CVD growth and template synthesis, and so on. Among these methods, the template method has been widely used for preparing one-dimensional nanostructures such as metals, semiconductors, polymers, and other materials by electrochemical, electroless deposition or sol-gel technique. Especially anodic aluminum oxide template assisted way has attached considerable attention due to its unique structure properties, such as controllable pore diameter, extremely narrow pore size distribution with high densities, high aspect ratios, and ideally cylindrical pore shape. The well arranged porous anodic aluminum oxide membrane is fabricated from aluminum film by two steps zM oxalic acid electrolytes. The anodic aluminum oxide membrane was investigated for features such as pore size, interpore distance, and thickness by 40 V. It is important for fabrication of porous anodic aluminum oxide template to find out elimination of the barrier layer of oxide and the pore extending rate by 0.5 M phosphoric acid. Morphologies of surface of aluminum film between anodization process and the anodic aluminum oxide barrier layer was researched by using atomic force microscope and scanning electron microscope. Results showed that the anodic aluminum oxide having the same diameter of the pore and the well arranged pore array without branching channel was obtained. The diameter of the pore before the pore extending treatment is 42 nm and the diameter of the pore after the pore extending treatment for 30 minutes is 86 nm. It was found that the diameter of the pore increased per 15 nm by the pore extending treatment for 10 minutes. We fabricated the through-hole anodic aluminum oxide template and made Cu nanowire by the template of our own making. By using Cu nanowire, we try to produce nanowire surface fastener and evaluate its properties.

Kinetics of Electrodeposition of Silver and Copper at Template Synthesis of Nanowires

Electrochemical synthesis of silver oxide nanowires, microplatelets and application as SERS substrate precursors

Low Electrical Percolation Threshold of Silver and Copper Nanowires in Polystyrene Composites

Kinetics of Charge-Transfer Reactions at Nanoscopic Electrochemical Interfaces

Template-assisted growth of silver nanowires by electrodeposition

Features of the Process of Galvanic Deposition of Metals into the Ion Track Membranes’ Pores

Delft University of Technology Fabrication of copper nanowires via electrodeposition in anodic aluminum oxide templates formed by combined hard anodizing and electrochemical barrier layer thinning

Comparison of the Resistivities of Nanostructured Films Made from Silver, Copper-Silver and Copper Nanoparticle and Nanowire Suspensions

Fabrication of Anodic Aluminum Oxide Template and Cu Nanowire Surface Fastener

The fabrication of short metallic nanotubes by templated electrodeposition

G030084 Fabrication of High Density Cu Nanowire Array by Template Method and Its Evaluation

Electrodeposition: Small 20/2009

Synthesis of Silver Nanotubes by Electroless Deposition in Porous Anodic Aluminium Oxide Templates

Direct Electron Beam Writing of Silver-Based Nanostructures

Nanoscale characterization of thin immersion silver coatings on copper substrates

Formation of Nanowires of Various Types in the Process of Galvanic Deposition of Iron Group Metals into the Pores of a Track Membrane

Fabrication of multilayer and silver oxide nanowires using electro-chemical deposition in the anodic aluminum oxide template

Synthesis of copper and silver nanoparticles by molecular beam method

Copper Metallization of Gold Nanostructure Activated Polypyrrole by Electroless Deposition

Electrochemical Deposition of Silver Nanoparticle Assemblies on Carbon Ultramicroelectrode Arrays

Characterization of electrochemical deposition of copper and copper(I) oxide on the carbon nanotubes coated stainless steel substrates