Abstract:Purpose: Experimentally verify a previously described technique for performing passive acoustic imaging through an intact human skull using noninvasive, computed tomography (CT)-based aberration corrections Jones et al. [Phys. Med. Biol. 58, 4981-5005 (2013)]. Methods: A sparse hemispherical receiver array (30 cm diameter) consisting of 128 piezoceramic discs (2.5 mm diameter, 612 kHz center frequency) was used to passively listen through ex vivo human skullcaps (n = 4) to acoustic emissions from a narrow-band fixed source (1 mm diameter, 516 kHz center frequency) and from ultrasound-stimulated (5 cycle bursts, 1 Hz pulse repetition frequency, estimated in situ peak negative pressure 0.11-0.33 MPa, 306 kHz driving frequency) Definity™ microbubbles flowing through a thin-walled tube phantom. Initial in vivo feasibility testing of the method was performed. The performance of the method was assessed through comparisons to images generated without skull corrections, with invasive source-based corrections, and with water-path control images. Results: For source locations at least 25 mm from the inner skull surface, the modified reconstruction algorithm successfully restored a single focus within the skull cavity at a location within 1.25 mm from the true position of the narrow-band source. The results obtained from imaging single bubbles are in good agreement with numerical simulations of point source emitters and the authors' previous experimental measurements using source-based skull corrections O'Reilly et al. [IEEE Trans. Biomed. Eng. 61, 1285-1294 (2014)]. In a rat model, microbubble activity was mapped through an intact human skull at pressure levels below and above the threshold for focused ultrasound-induced blood-brain barrier opening. During bursts that led to coherent bubble activity, the location of maximum intensity in images generated with CT-based skull corrections was found to deviate by less than 1 mm, on average, from the position obtained using source-based corrections. Conclusions: Taken together, these results demonstrate the feasibility of using the method to guide bubble-mediated ultrasound therapies in the brain. The technique may also have application in ultrasound-based cerebral angiography.

A Deep Learning‐Based Approach to Characterize Skull Physical Properties: A Phantom Study

Performance of Learned Pseudo-Ct in Transcranial Ultrasound Simulations Using Fluid and Solid Skulls

Robust deep learning estimation of cortical bone porosity from MR T1-weighted images for individualized transcranial focused ultrasound planning

Synthetic Skull CT Generation with Generative Adversarial Networks to Train Deep Learning Models for Clinical Transcranial Ultrasound

Transcranial ultrafast ultrasound Doppler imaging: A phantom study

Automatic Skull Reconstruction by Deep Learnable Symmetry Enforcement

Development of binder-jetting based skull phantoms for transcranial ultrasound research

Development of a CT-Compatible, Anthropomorphic Skull and Brain Phantom for Neurosurgical Planning, Training, and Simulation

Deep Learning Analysis of Ultrasonic Guided Waves for Cortical Bone Characterization

Design and Characterization of an Acoustically and Structurally Matched 3-D-printed Model for Transcranial Ultrasound Imaging.

Creating high-resolution 3D cranial implant geometry using deep learning techniques

Prediction and near-field observation of skull-guided acoustic waves

Experimental demonstration of passive acoustic imaging in the human skull cavity using CT-based aberration corrections

Using an Ultrasound Tissue Phantom Model for Hybrid Training of Deep Learning Models for Shrapnel Detection

High resolution transcranial imaging based on the optoacoustic memory effect

Skull's Photoacoustic Attenuation and Dispersion Modeling with Deterministic Ray-Tracing: Towards Real-Time Aberration Correction

Synthetic CT Skull Generation for Transcranial MR Imaging-Guided Focused Ultrasound Interventions with Conditional Adversarial Networks

Automated skull damage detection from assembled skull model using computer vision and machine learning

Improving Deep Learning-based Automatic Cranial Defect Reconstruction by Heavy Data Augmentation: From Image Registration to Latent Diffusion Models

Deep Learning with Physics-embedded Neural Network for Full Waveform Ultrasonic Brain Imaging

Automatic Skull Defect Restoration and Cranial Implant Generation for Cranioplasty