Abstract:A series of Ni catalysts supported on alumina with different Ce contents(1.0%–6.0%, mass fraction) was prepared by the impregnation method and used for dry reforming of methane(DRM) at a relatively low temperature of 650 °C. The promotion effect of Ce with different loading amounts on the physicochemical properties of the catalysts was systematically characterized by transmission electron microscopy(TEM), X-ray diffraction(XRD), N2 adsorption-desorption, thermo elemental IRIS Intrepid inductively coupled plasma atomic emission spectrometer (ICP-AES), UV-visible diffuse reflectance spectroscopy(UV-Vis DRS), Fourier transformation infrared(FTIR) spectra, H2-temperature programmed reduction(H2-TPR) analysis, H2-temperature programmed desorption(H2-TPD), and The X-ray photoelectron spectroscopy(XPS) techniques. The results indicate that all the catalysts mainly exist in the NiAl2O4 phase after being calcined at 750 °C with small Ni particle sizes due to the strong metal-support interaction derived from the reduction of the NiAl2O4 phase. The Ce-promoted catalysts show better catalytic performance as well as the resistance against sintering of Ni particles and deposition of carbon compared to the Ni/Al2O3 catalyst. The Ni-6Ce/Al2O3 exhibits the best catalytic stability and coke resistance among the four catalysts studied, which is due to its small Ni nanoparticles sizes, excellent reducibility as well as high amount of active oxygen species. In a 400 h stability test for DRM reaction at 650 °C, Ni-6Ce/Al2O3 exhibits less coke deposition and small growth of Ni nanoparticles. This work provides a simple way to preparing the Ni-Ce/Al2O3 catalyst with enhanced catalytic performance in DRM. The Ni-6Ce/Al2O3 catalyst has great potential for industrial application due to its anti-sintering ability and resistance to carbon deposition.

Effect of Ce/Ti ratio on the catalytic activity and stability of Ni/CeO2–TiO2 catalyst for dry reforming of methane

Ni-CeO2/TS-1 Catalyze Methane Dry Reforming: Improving Catalytic Performance and Stability by Modulating the Amount and Strength of Ni-O-X Species

Dry Reforming of Methane over 5%Ni/Ce1-xTixO2 Catalysts Obtained via Synthesis in Supercritical Isopropanol

Highly efficient and stable Ni/CeO2-SiO2 catalyst for dry reforming of methane: Effect of interfacial structure of Ni/CeO2 on SiO2

Synthesis Gas Production in the Combined CO2 Reforming with Partial Oxidation of Methane over Ce-promoted Ni/SiO2 Catalysts

Improving Catalytic Stability and Coke Resistance of Ni/Al2O3 Catalysts with Ce Promoter for Relatively Low Temperature Dry Reforming of Methane Reaction

Effect of CeO2 on the catalytic performance of Ni/Al2O3 for autothermal reforming of methane

Reducing Carbon Deposition and Enhancing Reaction Stability by Ceria for Methane Dry Reforming over Ni@SiO2@CeO2 Catalyst

Crystal-plane effect of nanoscale CeO2 on the catalytic performance of Ni/CeO2 catalysts for methane dry reforming

Ni/Ce0.9Eu0.1O1.95 with enhanced coke resistance for dry reforming of methane

Unraveling the effects of Ce/Zr molar ratio in mesoporous CexZr1−xO2 on the performance of dry reforming of methane over the supported Ni catalysts

The Effect of CeO2 Preparation Method on the Carbon Pathways in the Dry Reforming of Methane on Ni/CeO2 Studied by Transient Techniques

Co–Ni Alloy Supported on CeO2 As a Bimetallic Catalyst for Dry Reforming of Methane

Methane reforming over Ni/Ce-ZrO2 catalysts: effect of nickel content

Effect of CeO2 morphology on performance of NiO/CeO2 catalyst in combined steam and CO2 reforming of CH4

The Study of CO2 Reforming of Methane over Ce/Sm-promoted NiCaAl Catalysts

Role of CeO2 in Ni/CeO2–Al2O3 catalysts for carbon dioxide reforming of methane

Syngas Production via Combined Steam and Carbon Dioxide Reforming of Methane over Ni-Ce<sub>X</sub>M<sub>1-X</sub>O<sub>2</sub> (M = Ti or Zr) Catalysts

Biogas Reforming on Hydrotalcite-Derived Ni-Mg-Al Catalysts: the Effect of Ni Loading and Ce Promotion

Lamellar cross-linking Ni/CeO 2 as an efficient and durable catalyst for dry reforming of methane

Effects of Extrinsic Defects Originating from the Interfacial Reaction of CeO2-x-nickel Silicate on Catalytic Performance in Methane Dry Reforming