Abstract:Lithium-ion batteries (LIBs) are critically important rechargeable energy storage devices, finding widespread application in consumer electronics and electric vehicles. However, safety issues associated with their flammability impede their development for many applications. As a fully solid-state device, the thin film battery (TFB) is a compelling candidate for advanced microscale applications, including wearable devices, smart ID cards, and microelectromechanical systems (MEMS). A typical TFB design consists of solid thin films of crystalline cathode, amorphous LiPON electrolyte, Li metal anode and current collectors supported on a rigid substrate. Polycrystalline cathodes are often employed, such as LiCoO 2 , Li 2 Mn 2 O 4 , LiNiO 2 , V 2 O 5 , etc., because they provide high specific capacity and good reversibility. However, these cathodes require thermal treatment to generate the crystalline microstructure for optimal electrochemical performance, demanding substrates that are stable to several hundreds of degrees Celsius. The industry is interested in lower-cost, flexible all-solid-state thin-film batteries that can be readily integrated into a wide range of applications, including wearable devices. Thus, there is strong demand for thin film cathodes that can be processed at low temperatures. Herein, we report a new amorphous inorganic thin-film cathode material, which is a solid state composite of Li 2 RuO 3 and LiCoO 2 . (LRCO). Without any post-deposition annealing steps, as-deposited LRCO thin films possess a high discharge capacity of over 110 μAh cm -2 μm -1 at 0.3 C and capacity retention over 92% after 150 cycles owing to both cationic and anionic (oxygen oxidation) redox processes, which is competitive with conventional polycrystalline thin-film cathodes. The surface of LRCO cathode is smooth and isotropic, leading to uniform Li ion transport and thereby reducing the possibility of short-circuiting. More importantly, the entire preparation process is conducted at room temperature, enabling wider substrate options for TFBs, such as Kapton ® films, polyethylene terephthalate (PET) films, or even paper sheets. Using PET plastic sheets to support LRCO TFBs; a specific capacity of 101 μAh cm -2 μm -1 at 0.3 C and capacity retention of 97.5% after 120 cycles was achieved, even when the substrate was mechanically bent (flexed).

Preparation and Discharge Performance of Thin‐Film Thermal Battery

Aqueous Tape Casting Phosphate Ceramic Electrolyte Membrane for High Performance All Solid-State Lithium Metal Battery

Tape-Casting Li 0.34 La 0.56 TiO 3 Ceramic Electrolyte Films Permit High Energy Density of Lithium-Metal Batteries.

Study on the Activation of Thin Film Li-ion Batteries

A Thin Flexible Zinc Battery Enabled by Simultaneously Electro-Depositing Both Electrodes in Acetate Electrolytes

Electrostatic Spray Deposition of Spinel Li4ti5o12 Thin Films for Rechargeable Lithium Batteries

A High Ceramic Loading LATP-PVDF-Al2O3 Composite Film for Lithium-ion Batteries with Favorable Porous Microstructure and Enhanced Thermal Stability

Fabrication and Electrochemical Properties of All Solid State 0.3Ag-V2o5│lipon│li Thin Film Battery

Research Progress on Thin-Film Lithium Batteries

Integrated Thin Film Battery Design for Flexible Lithium Ion Storage: Optimizing the Compatibility of the Current Collector‐Free Electrodes

3D Ion‐Conducting, Scalable, and Mechanically Reinforced Ceramic Film for High Voltage Solid‐State Batteries

Ultrathin Al–air batteries by reducing the thickness of solid electrolyte using aerosol jet printing

Preparation and characterization of thick-film Ni/MH battery

(Digital Presentation) Ultra-Thick Electrodes Utilizing Short Diffusion Path Via Novel Micro-Casting Process for Lithium-Ion Batteries

A High‐Performance Lithium Metal Battery with Ion‐Selective Nanofluidic Transport in a Conjugated Microporous Polymer Protective Layer

High-Capacity Cathodes for All-Solid-State Thin-Film Batteries

Design and preparation of thick electrodes for lithium-ion batteries

Cellulose Mesh Supported Ultrathin Ceramic-Based Composite Electrolyte for High-Performance Li Metal Batteries

3D printing PEDOT-CMC-based high areal capacity electrodes for Li-ion batteries

PVA-assisted spray deposited porous Li4Ti5O12 thin film as high-rate and long-cycle anode for lithium-ion thin-film batteries

Battery Prelithiation Enabled by Lithium Fixation on Cathode