Abstract:The growing number of electric vehicles and devices drives the demand for lithium-ion batteries. The purpose of the batteries used in electric vehicles and applications is primarily to preserve the cells and extend their lifetime, but they will wear out over time, even under ideal conditions. Most battery system failures are caused by a few cells, but the entire system may have to be scrapped in such cases. To address this issue, the goal is to create a concept that will extend the life of batteries while reducing the industrial and chemical waste generated by batteries. Secondary use can increase battery utilization and extend battery life. However, processing a large number of used battery cells at an industrial level is a significant challenge for both manufacturers and users. The different battery sizes and compositions used by various manufacturers of electric vehicles and electronic devices make it extremely difficult to solve the processing problem at the system level. The purpose of this study is to look into non-destructive battery diagnostic options. During the tests, the condition of the cells is assessed using a new diagnostic technique, 3D surface digitalization, and the fusion of electrical parameters. In the case of surface digitalization, the digital image correlation (DIC) technique was used to estimate the cell state. The tests were conducted on various cells with widely used geometries and encapsulations. These included a lithium polymer (soft casing), 18650 standard sizes (hard casing), and prismatic cells (semi-hard). The study also included testing each battery at various charge states during charging and discharging. The findings help to clarify the changes in battery cell geometry and their localization. The findings can be applied to cell diagnostic applications such as recycling, quality assurance, and vehicle diagnostics.

Experimental and simulation study of direct current resistance decomposition in large size cylindrical lithium-ion battery

Electro-Thermal Modeling of a Hollow Structure Design of Cylindrical Lithium-Ion Battery

Comprehensive Aging Model Coupling Chemical and Mechanical Degradation Mechanisms for NCM/C6-Si Lithium-Ion Batteries

Direct current internal resistance decomposition model for accurate parameters acquisition and application in commercial high voltage LiCoO 2 battery

Study on the thermal interaction and heat dissipation of cylindrical Lithium-Ion Battery cells

Thermal and Stoichiometry Inhomogeneity Investigation of Large-Format Lithium-Ion Batteries Via a Three-Dimensional Electrochemical-Thermal Coupling Model

Experimental investigation on mechanical-electrochemical coupling properties of cylindrical lithium-ion batteries

Numerical and experimental study on thermal behavior of prismatic lithium-ion battery for large-capacity energy storage

Volume Deformation Of Large-Format Lithium Ion Batteries Under Different Degradation Paths

Dynamic crushing behaviors and failure of cylindrical lithium-ion batteries subjected to impact loading

Internal short circuit and dynamic response of large-format prismatic lithium-ion battery under mechanical abuse

Deformation Analysis of Different Lithium Battery Designs Using the DIC Technique

Pore-scale modeling and investigation on the effect of calendering on lithium-ion battery cathodes

Probing Particle-Carbon/Binder Degradation Behavior in Fatigued Layered Cathode Materials through Machine Learning Aided Diffraction Tomography

A 3D distributed circuit-electrochemical model for the inner inhomogeneity of lithium-ion battery

Unravelling and Quantifying the Aging Processes of Commercial Li(Ni0.5Co0.2Mn0.3)O2/Graphite Lithium-ion Battery under Constant Current Cycling

The Timescale Identification and Quantification of Complicated Kinetic Processes in Lithium-Ion Batteries Based on Micro-Reference Electrodes

Analysis of Performance Degradation in Lithium-Ion Batteries Based on a Lumped Particle Diffusion Model

Dynamic Crushing Behaviors of Cylindrical Lithium-Ion Battery Under Multiple Impacts: An Experimental Study

Influence of calendering process on the structural mechanics and heat transfer characteristics of lithium-ion battery electrodes via DEM simulations

Quantitative Understanding of Lithium Deposition‐Stripping Process on Graphite Anodes of Lithium‐Ion Batteries