Abstract:Degradation is one of the most important battery characteristics in the development of (Hybrid) Electric Vehicles ((H)EV). Many studies are devoted to the cycling performance of Li-ion batteries in order to understand the underlying aging mechanisms [1,2]. Cyclable Li loss and electrode materials decay are considered to be the most important factors leading to battery degradation. C6/LiFePO4 (LFP) batteries are excellent candidates to study the C6anode aging since the cathode has an outstanding (electro)chemical stability at moderate temperatures. In the present work, the aging mechanisms of LFP batteries have been systematically investigated as a function of temperature under both long-term storage and cycling conditions. Electromotive force (EMF) curves, regularly determined by mathematical extrapolation of the measured voltage curves under various discharge currents, are used to obtain an in-depth understanding of the aging mechanisms. The irreversible capacity loss (ΔQir) under various aging conditions have been accurately determined on the basis of the maximum capacities estimated from the EMF curves. To distinguish between calendar ageing and degradation resulting from cycling, a new method is proposed. Information about the individual contributions is elegantly obtained by extrapolating the total irreversible capacity loss on the basis of current and time as shown in Fig. 1a and b, respectively. Extrapolating to cycle number 0 in Fig. 1a now exclusively unravels the calendar ageing performance. On the other hand, extrapolating to time 0 in Fig. 1b exclusively reveals the ageing characteristics upon cycling. A non-destructive analyses of the graphite electrode decay has been carried out on the basis of the extrapolated dVEMF/dQ curves. The graphite electrode decay has been quantified and has been attributed to (i) Li-immobilization inside the SEI layer, (ii) structural deformation of the graphite electrode and (iii) iron deposition onto the graphite electrode.The structural deformation of the graphite electrode has been confirmed by the Raman analyses. Iron deposition onto the graphite electrode at elevated temperatures under both storage and cycling conditions has been confirmed by X-ray photoelectron spectroscopy (XPS), indicating that iron dissolution from the cathode is strongly temperature dependent. The Fe deposits onto the graphite electrode are shown to accelerate the SEI formation due to the enhanced electron transport. All irreversible capacity losses are modeled on the basis of the recently proposed SEI electron tunneling model [3,4]. Both the experimental and simulation results show that the temperature, the (dis)charge current and the State-of-Charge (SoC) play an important role in the degradation of LFP batteries. References [1] M. Safari, C. Delacourt, J. Electrochem. Soc., 158(2011) A1123. [2] M. Dubarry, B.Y. Liaw, M.S. Chen, S.S. Chyan, K.C. Han, W.T. Sie, S.H. Wu, J. Power Sources, 196 (2011) 3420. [3] D. Li, D. Danilov, Z. Zhang, H. Chen, Y. Yang, P.H.L. Notten, ECS Transactions, 62(2014) 8. [4] D. Li, D. Danilov, Z.R. Zhang, H.X. Chen, Y. Yang, P.H.L. Notten, J. Electrochem. Soc., 162(2015) A858. Fig. 1. The development of under various cycling conditions as a function of both cycle number and time. The storage capacity curves are extrapolated to cycle number 0 implying a current of 0 C-rate and representing calendar aging (a). Extrapolating to cycle time 0 then exclusively represents ageing characteristics upon cycling (b). Figure 1

Unravelling and Quantifying the Aging Processes of Commercial Li(Ni0.5Co0.2Mn0.3)O2/Graphite Lithium-ion Battery under Constant Current Cycling

Investigation of Lithium-Ion Battery Nonlinear Degradation by Experiments and Model-Based Simulation

Investigation of Lithium-Ion Battery Degradation Mechanisms by Combining Differential Voltage Analysis and Alternating Current Impedance

Comprehensive Analysis on Aging Behavior and Safety Performance of LiNixCoyMnzO2/graphite Batteries after Slight Over-Discharge Cycle

Degradation Identification of LiNi0.8Co0.1Mn0.1O2/graphite Lithium-Ion Batteries under Fast Charging Conditions

A New Approach to Distinguish Two Different Degradation Mechanisms in Cycling Aging of Li-Ion Batteries

Investigation of Capacity Fade for 18650-Type Lithium-Ion Batteries Cycled in Different State of Charge (soc) Ranges

Aging Mechanisms and Evolution Patterns of Commercial LiFePO4 Lithium-Ion Batteries

Investigation the Degradation Mechanisms of Lithium-Ion Batteries under Low-Temperature High-Rate Cycling

A New Approach to Distinguish Between Calendar Ageing and Cycling-Induced Ageing of Li-Ion Batteries

Temperature-dependent Cycling Performance and Ageing Mechanisms of C6/LiNi1/3Mn1/3Co1/3O2 Batteries

Quantitative Analysis of Aging and Detection of Commercial 18650 Lithium-Ion Battery under Slight Overcharging Cycling

Degradation Diagnostics of Lithium-Ion Batteries Cycled Under Varying Conditions

Degradation mechanisms of C6/LiFePO4 batteries: experimental analyses of cycling-induced aging

Quantitative Analysis of Active Lithium Loss and Degradation Mechanism in Temperature Accelerated Aging Process of Lithium‐Ion Batteries

Aging Mechanisms of Lithium-ion Batteries

Electrochemical Aging Protocol Governed Capacity Losses and Structure Degradations in Layered LiNi0.8Co0.1Mn0.1O2 Oxides

A comparative study of commercial lithium ion battery cycle life in electrical vehicle: Aging mechanism identification

Expanded in situ aging indicators for lithium-ion batteries with a blended NMC-LMO electrode cycled at sub-ambient temperature

Understanding Long-Term Cycling Performance of Li1.2Ni0.15Mn0.55Co0.1O2–Graphite Lithium-Ion Cells

A Physics-Based Aging Model for Lithium-Ion Battery with Coupled Chemical/mechanical Degradation Mechanisms