Abstract:There is a continuing effort by turbulence researchers to provide improved turbulent heat flux predictions for Reynolds-averaged Navier-Stokes (RANS) calculations of heat transfer applications. In this paper, data-driven models are developed for the turbulent heat flux prediction in wall jets with coflow using a gene expression programming (GEP)–based machine-learning technique. The training data used as input to the optimization algorithm are obtained by performing highly resolved large eddy simulations (LES) of nine cases covering various flow and geometry conditions. The study examines whether predictive RANS-based heat transfer closures can be trained that are robust to these physically very different nine LES cases. The GEP heat flux closures were developed by adopting the gradient-diffusion hypothesis with the optimization target being a nondimensional parameter representing the inverse of a nonconstant turbulent Prandtl number (Prt), with a functional dependence on the velocity and temperature gradients. First, examination of the turbulent Prandtl number calculated from time-averaged LES data showed a significant deviation from the commonly assumed constant value of 0.9, with a more significant dependence on the lip wall thickness than the blowing ratio. Second, a posteriori testing of the developed closures by solving the RANS-based scalar transport equation using as input the LES time-averaged velocity and turbulent viscosity showed a significant improvement in the prediction of adiabatic wall effectiveness not only for the cases they were trained on, but also for the entire matrix of LES cases. Finally, our best-performing model (trained on the thickest lip wall case) was also evaluated in a full RANS context and a significant improvement for the prediction of the adiabatic wall effectiveness was achieved, in particular for the medium and the thin lip thickness cases. The lack of improvement when testing the thickest lip wall case in a full RANS context indicates that for cases with strong vortex shedding the effect of organized unsteadiness on the turbulent flow field is important. In such cases, only modifying the heat flux model without improving the RANS velocity field is not sufficient and other methodologies like deriving a model for the Reynolds stress are necessary. Collectively, the current study demonstrates the ability of the presented model-development framework in creating bespoke models that can provide accurate predictions for a wide range of operating conditions.

Prediction of heat transfer for a single round jet impingement using the GEKO turbulence model

Numerical Prediction of Transitional Features of Turbulent Forced Gas Flows in Circular Tubes with Strong Heating

CFD Prediction for Multi-Jet Impingement Heat Transfer

Simulation of Gas Jet Impingement Cooling in Continuous Heat Treatment Lines with the ANSYS GEKO Turbulence Model*

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Computation of Hypersonic Transitional Flows Over Cones Using Gas-Kinetic Scheme Coupled with the Turbulence Model

Numerical Study of Flow and Heat Transfer of Impingement Cooling on Model of Turbine Blade Leading Edge

Numerical Study on Heat Transfer of an Impinging Turbulent Plane Jet with Confined Wall.

Modelling Of Impinging Flow And Heat Transfer In A Confined Narrow Gap

Numerical Study of the Flow and Heat Transfer of a Rectangular-tube Turbulent Impinging Jet Flow

Prediction of Forced Gas Flows in Circular Tubes at High Heat Fluxes Accompanied by Laminarization

A Predictive Surrogate Model for Heat Transfer of an Impinging Jet on a Concave Surface

Efforts to Identify the Most Suitable RANS Turbulence Model for Accurate Conjugate Heat Transfer Prediction in Regenerative Cooled Nozzles

Numerical Study on Stagnation Point Heat Transfer by Jet Impingement in A Confined Narrow Gap

A developed transition simulation model for turbulent plane jet impingement heat transfer

Conjugate Heat Transfer Predictions on Combined Impingement and Film Cooling of a Blade Leading Edge Model

Influence of the turbulence model on the numerical predictions of cold turbulent flow in a heavy-duty gas turbine DLN combustor

Comparison study of turbulence models in numerical simulation of multi-jets impinging injectors

NUMERICAL PREDICTION OF A RECTANGULAR TURBULENT JET IN A CROSS FLOW

Large eddy simulations of wall jets with coflow for the study of turbulent Prandtl number variations and data-driven modeling

Three-Dimensional Simulation of Turbulent Rectangular and Square Impinging Jet Flows