Abstract:This study investigates the enhancement of compatibility between natural reinforcement materials and polymer matrices, with a focus on Alfa fibers polypropylene (PP) composites. Composites Alfa fibers/PP are prepared using untreated and treated alfa fibers and with or without the addition of a MAPP compatibilizing agent. Firstly, Alfa fibers extracted from the plant are categorized into two groups: untreated and treated with a 3% (wt/v) alkaline solution followed by bleaching. This chemical treatment significantly increases the cellulose content and crystallinity index of the fibers, with improvements of 39.7% and 13.6%, respectively. Secondly, the study incorporates 5 wt% MAPP in the PP matrix as a compatibilizer. The composites produced with 30 wt% of alfa fibers are processed using a single screw extruder, followed by injection molding. Composites samples obtained are characterized using various methods. Thermal analysis reveals that the incorporation of chemically treated alfa fibers along with MAPP significantly accelerates the crystallization rate of the PP matrix, indicating the fibers' role as effective nucleating agents. Mechanical testing shows marked improvements in the Young's modulus and tensile strength of the composites obtained with treated alfa fibers reinforcing the MAPP-PP matrix, with increases of 1.67% and 4.61% over their untreated counterparts, respectively. 本研究调查了天然增强材料与聚合物基体之间相容性的增强,重点研究了阿尔法纤维聚丙烯(PP)复合材料. 阿尔法纤维/PP复合材料是使用未经处理和处理的阿尔法纤维制备的,并添加或不添加MAPP增容剂. 首先,从植物中提取的阿尔法纤维分为两组: 未经处理和用3%(wt/v)碱性溶液处理,然后漂白. 这种化学处理显著提高了纤维的纤维素含量和结晶度指数,分别提高了39.7%和13.6%. 其次,该研究将5 wt%的MAPP作为增容剂掺入PP基体中.用30重量%的alfa纤维生产的复合材料使用单螺杆挤出机加工,然后进行注塑成型. 使用各种方法对获得的复合材料样品进行表征. 热分析表明,化学处理的alfa纤维与MAPP的结合显著加速了PP基体的结晶速率,表明纤维是有效的成核剂. 机械测试表明,用处理过的alfa纤维增强MAPP-PP基体获得的复合材料的杨氏模量和拉伸强度显著提高,分别比未处理的相应材料提高了1.67%和4.61%.

Effects of different coupling agents on the mechanical and interfacial properties of oil palm fiber reinforced polypropylene composites

Oil palm fiber reinforced polypropylene composites: effects of fiber loading and coupling agents on mechanical, thermal, and interfacial properties

Effects of fiber loading, fiber type, its mesh sizes, and coupling agent on the properties of oil palm biomass/polypropylene composites

Polypropylene biocomposites reinforced with bamboo particles and ultrafine bamboo-char: The effect of blending ratio

Composites of Polypropylene Reinforced with Ultrafine Bamboo-char: Morphology, Mechanical and Thermal Properties

Influence of coupling agent content on the properties of high density polyethylene composites reinforced with oil palm fibers

Oil palm bio-fiber-reinforced polypropylene composites: effects of alkali fiber treatment and coupling agents

Effect of SEBS-MA and MAPP as coupling agent on the thermal and mechanical properties in highly filled composites of oil palm fiber/PP

Study on Properties of Modified Bamboo Fiber Reinforced Polypropylene Composites

The characterization and properties of low linear density polyethyelene (LLDPE)/ acrylonitrile butadiene rubber (NBR)/ palm press fiber (PPF) with γ-aminopropyltriethoxysilane coupling agent

Oxidative induction and performance of oil palm fiber reinforced polypropylene composites – Effects of coupling agent and UV stabilizer

Effect of Silane Coupling Agent on the Mechanical Properties of Oil Palm Frond Fiber Composite

Effect of Surface Treatment of Glass Fibres on Adhesion to Polypropylene Resin

Electrical Properties of Bamboo Fiber Reinforced Polypropylene Composite: Effect of Coupling Agent

Study on Effect of Surface Treating Method on Mechanical Behavior of Three Plant Fiber Reinforced Polypropylene Composites

The effect of woven oil palm empty fruit bunches (OPEFB) filler fiber on the mechanical properties of natural and synthetic rubber

The Effect of Epoxy Resin Compatibilizer On Polypropylene (PP) / Recycled Acrylonitrile Butadiene Rubber (NBRr) / Banana Skin Powder (BSP) Composites

Enhancing the Bio-epoxy Composites with Oil Palm Fibre as Reinforcement: Assessment of Mechanical, Physical and Thermal Properties

Physico-Thermal and Mechanical Characterization of Alfa Fiber/Polypropylene Composites: Effects of Fiber Treatment and MAPP Compatibilization

Tensile Strength and Morphological Behavior of Treated Oil Pam Empty Fruit Bunch Particle Reinforced Polymeric Composite

Characterization of Thermo-Mechanical and Chemical Properties of Polypropylene/Hemp Fiber Biocomposites: Impact of Maleic Anhydride Compatibilizer and Fiber Content