Abstract:This study evaluates the thermal and mechanical behavior of hybrid composites made from date palm (DP) and kenaf fibers (KF) in an epoxy thermoset matrix. Both DP and KF fibers are abundant and renewable, reducing environmental impact. KF offers high tensile strength and stiffness, improving composite strength and rigidity, while DP fibers offer toughness and impact resistance, enhancing durability. The composites were developed in 30%, 50%, and 70% DP-KF compositions using layup and hot-pressing methods. Fiber treatment through alkalization was analyzed for its impact on mechanical and thermal properties to find the optimal fiber ratio. The hybrid composites were subjected to DMA, TGA, and flexural tests. The treated composites exhibited fewer impurities and increased cellulose content, resulting in enhanced flexural performance. This improvement was evident through higher storage modulus, lower loss modulus, and reduced tan δ when exposed to thermal stress. The 30% DP and 70% KF composites exhibited best performance. The treated 30DP-70KF exhibited improvement in the flexural strength and modulus by 13.8% and 2.7%, respectively. TGA demonstrated that treated 30DP-70KF composites had a higher glass transition temperature (Tg) and better thermal degradation resistance. These findings highlight the potential of natural fiber hybrids in creating sustainable, high-performance composite materials for construction and industrial applications. 本研究评估了由椰枣(DP)和红麻纤维(KF)在环氧热固性基质中制成的杂化复合材料的热性能和力学性能。DP和KF纤维都是丰富且可再生的,可以减少对环境的影响. KF具有高抗拉强度和刚度,提高了复合材料的强度和刚性,而DP纤维具有韧性和抗冲击性,增强了耐用性. 使用叠层和热压方法,以30%、50%和70%的DP-KF成分开发了复合材料. 分析了碱化纤维处理对力学和热性能的影响,以找到最佳纤维比. 对混合复合材料进行了DMA、TGA和弯曲试验. 经处理的复合材料显示出更少的杂质和增加的纤维素含量,从而提高了弯曲性能. 当暴露于热应力时,这种改善通过更高的储能模量、更低的损耗模量和降低的tanδ而显而易见. 30%DP和70%KF复合材料表现出最佳性能. 经处理的30DP-70KF的弯曲强度和模量分别提高了13.8%和2.7%. TGA表明,经处理的30DP-70KF复合材料具有更高的玻璃化转变温度(Tg)和更好的抗热降解性. 这些发现突显了天然纤维杂化材料在为建筑和工业应用创造可持续、高性能复合材料方面的潜力.

Oil palm bio-fiber-reinforced polypropylene composites: effects of alkali fiber treatment and coupling agents

Oil palm fiber reinforced polypropylene composites: effects of fiber loading and coupling agents on mechanical, thermal, and interfacial properties

Effects of fiber loading, fiber type, its mesh sizes, and coupling agent on the properties of oil palm biomass/polypropylene composites

Effects of different coupling agents on the mechanical and interfacial properties of oil palm fiber reinforced polypropylene composites

Influence of coupling agent content on the properties of high density polyethylene composites reinforced with oil palm fibers

Effect of SEBS-MA and MAPP as coupling agent on the thermal and mechanical properties in highly filled composites of oil palm fiber/PP

Effect of Fibre Volume Fraction and Sodium Hydroxide Treatment on Mechanical Properties of Palm Fibre/Unsaturated Polyester Composite

Oil palm fiber (OPF) and its composites: A review

Oxidative induction and performance of oil palm fiber reinforced polypropylene composites – Effects of coupling agent and UV stabilizer

The characterization and properties of low linear density polyethyelene (LLDPE)/ acrylonitrile butadiene rubber (NBR)/ palm press fiber (PPF) with γ-aminopropyltriethoxysilane coupling agent

Enhancing the Bio-epoxy Composites with Oil Palm Fibre as Reinforcement: Assessment of Mechanical, Physical and Thermal Properties

Physico-Thermal and Mechanical Characterization of Alfa Fiber/Polypropylene Composites: Effects of Fiber Treatment and MAPP Compatibilization

Effect of Silane Coupling Agent on the Mechanical Properties of Oil Palm Frond Fiber Composite

Effectiveness of oil palm fiber and surface treatments on the mechanical, thermal, morphological, and water absorption properties of wheat gluten composites

Enhanced Thermal and Flexural Properties of Alkalized Date Palm/Kenaf Fiber-Reinforced Epoxy Hybrid Composites: A Comparative Study of Untreated and Treated Fibers

Effect of Fiber Modified by Alkali/polyvinyl Alcohol Coating Treatment on Properties of Sisal Fiber Plastic Composites

Study on Mechanical Properties and Thermal Stability of Polypropylene/hemp Fiber Composites

The Influence of Chemically Treated Hemp Fibre on the Mechanical Behavior and Thermal Properties of Polylactic Acid Made with FDM

Study on Effect of Surface Treating Method on Mechanical Behavior of Three Plant Fiber Reinforced Polypropylene Composites

Flammability, Tensile, and Morphological Properties of Oil Palm Empty Fruit Bunches Fiber/Pet Yarn-Reinforced Epoxy Fire Retardant Hybrid Polymer Composites

Exploration of Mechanical Attributes, Thermal Behaviors and Atomic Force Analysis of Alkali Treated Hybrid Polyester Composites for an Engineering Application