Abstract:Soft Open Point (SOP) refers to a power electronic device installed in place of a normally-open point in a distribution network. The application of SOP will greatly promote the economy, flexibility and controllability of the distribution network. However, due to the high investment of SOP and operation cost of switch, the coordinated operation of SOP and switch needs to be considered. In this paper, a coordinated optimization method of SOP and tie switch operation simultaneously based on cost is proposed for the operation of active distribution system. Firstly, this paper builds a coordinated operation optimization model for SOP and switch considering action costs. Then, a conic model conversion is proposed and mixedinteger second-order cone programming is used to solve the model with efficiency and convergence. Finally, case studies on IEEE 33-node test feeder are used to verify the proposed coordinated optimization method. INTRODUCTION The development and application of smart distribution network and renewable resource generation technologies is pushing forward the reform of distribution & utilization pattern and operation management mechanism [1]. As a novel power electronic device, Soft Open Point (SOP), emerges to replace the normally-open point in distribution network. Compared with traditional tie switch, the power flow controlled by SOP is in an accurate and flexible way. It can realize real-time active power flow optimization and reactive power compensation, which effectively responds to the volatility brought by DG and load. However, traditional tie switch cannot be completely replaced by SOP in a short time in terms of the high investment. The operation optimization of distributed network containing both of them needs to be taken into account. Considering the power losses and current surge caused by switching events, the traditional tie switch can’t operate frequently. By contrast, SOP is capable of changing transmitted power and operation state, which offers a feasible solution to overvoltage and overload. In this case, the time series model of coordinated optimization of traditional tie switch and SOP is needed. Foundation item: Support by the Science & Technology Projects of CSG ( KY2014-2-0024 ). Reference [2] studied the basic principle and model of the SOP, while reference [3, 4] carried on the simulation analysis of steady-state and transient characteristics of SOP, respectively, which will provide a foundation for the coordinated optimization for SOP and tie switch. This paper proposes a coordinated optimization method for SOP and tie switch considering action costs. The conic programming is employed to convert the original model into a mixed integer second order conic programming model. The effectiveness of the optimization model and algorithm is verified on the modified IEEE 33-node system. MODELING OF DISTRIBUTION NETWORK COORDINATED OPERATION WITH SOP AND TIE SWITCHES In this section, considering the action costs of tie switch and power losses of SOP, the mathematical model of distribution network coordinated operation with SOP and tie switch is formulated. Objective function This paper takes the minimization of active power losses as the objective function, which is formulated as   SWI,loss NET,loss SOP,loss min min f W W W    (1) The overall active power losses of distribution network are composed of the following three parts. 1) W SWI,loss : equivalent losses of action costs caused by switches

A two-stage optimal strategy for flexible interconnection distribution network considering the loss characteristic of key equipment

Coordinated Emergency Load Shedding Control Optimization Algorithm for Economic Cost and Accident Assessment

Optimal Configuration for Soft Open Point Based on Scenario Generation of Wind Power and Photovoltaic Output

Optimized Two-Time Scale Robust Dispatching Method for the Multi-Terminal Soft Open Point in Unbalanced Active Distribution Networks

A Two-Layer Control Strategy for Soft Open Points Considering the Economical Operation Area of Transformers in Active Distribution Networks

Optimal Allocation of Soft Open Points in Distribution Networks Based on Candidate Location Opitimization

Distribution Network Reconfiguration Together with Distributed Generator and Shunt Capacitor Allocation for Loss Minimization

Two-stage Optimization for Active Distribution Systems Based on Operating Ranges of Soft Open Points and Energy Storage System

Topology Selection and Operation Strategy Design of the Soft Open Point in Looped Distribution Networks

Optimal Allocation of Soft Open Points in Active Distribution Network with High Penetration of Renewable Energy Generations

Dual-Q Theory Based Optimal Ordering Method for Distribution Network Planning Projects Considering Strong Couplings

Optimal Planning of a Soft Open Point in a Distribution Network Subject to Typhoons

Regional Optimal Scheduling of Distribution Network Based on Soft Open Point

A Coordinated Optimization Method of SNOP and Tie Switch Operation Simultaneously Based on Cost in Active Distribution Network

Resilience-Oriented Optimal Allocation of Multi-Port Soft Open Point in Distribution Network

Optimal deployment of feeder remote terminal units in distribution networks to improve power supply reliability

Emergency Power Supply Management Strategy for Low-Performance Distribution Networks Based on Mobile Multi-Port Interconnection Equipment

Multi-objective Supply Restoration in Active Distribution Networks with Soft Open Points

A Sequential Optimization Method for Soft Open Point Integrated with Energy Storage in Active Distribution Networks

Distribution network reconfiguration: An improved single loop optimization algorithm

Distribution Network Optimize Planning Based On Operation Efficiency And Benefits