Abstract:A ductile fracture model is proposed to describe shear fracture of sheet metals from shear to balanced biaxial tension via uniaxial and plane strain tension. The fracture criterion models plastic damage as strain-induced void nucleation, triaxiality-governed void enlargement, Lode-controlled void torsion, and shear-restrained coalescence of voids. Its flexibility is investigated by a parameter study of the ductile fracture model proposed. The fracture model is employed to describe ductile fracture behavior of an aluminum alloy AA6082 T6 (thickness: 1.0 mm). Dogbone specimens are strained to characterize the strain hardening properties, while another four different specimens are tested to characterize fracture behavior in shear, uniaxial tension, plane strain tension and balanced biaxial tension. The loading processes are analyzed numerically with the stress invariant-based Drucker yield function which is for the first time specified for body-centered cubic and face-centered cubic metals. Fracture strains in various loading conditions are measured with a hybrid experimental-numerical approach. The measured fracture strains are then used to calibrate the ductile fracture model proposed. The ductile fracture model calibrated above is employed to predict the onset of ductile fracture for these four specimens. For the purpose of comparison, the predicted fracture strokes of these four loading conditions are compared with those predicted by the modified Mohr-Coulomb model (Bai and Wierzbicki, 2008), and two micromechanism-inspired criteria proposed recently (Lou et al., 2012, 2014). The comparison reveals that the proposed model predicts the fracture behavior in much better agreement compared with experimental results from shear to the balanced biaxial tension. Accordingly, the proposed ductile fracture criterion is recommended for the prediction of ductile fracture in sheet metal forming processes, optimization of forming parameters and design of tools for both solid elements and shell elements. Besides, the ductile fracture model proposed can also be applied in various bulk metal forming processes in case that the model is calibrated by proper sets of experiments. (C) 2017 Elsevier Ltd. All rights reserved.

Fracture prediction of Fe-SMA under monotonic and low cycle fatigue loading

Improvement Of Cyclic Void Growth Model For Ultra-Low Cycle Fatigue Prediction Of Steel Bridge Piers

A Novel Machine-Learning Based Framework for Calibrating Micromechanical Fracture Model of Ultra-Low Cycle Fatigue in Steel Structures

Study on the Prediction Method of the Ultra-Low-Cycle Fatigue Damage of Steel

A Modified Coffin-Manson Model for Ultra-Low Cycle Fatigue Fracture of Structural Steels Considering the Effect of Stress Triaxiality

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Fracture prediction of circular steel tubular X-joints using a Lode parameter enhanced cyclic void growth model

Fracture Prediction for Square Hollow Section Braces under Extremely Low Cycle Fatigue

Fracture Prediction of Welded Steel Connections Using Traditional Fracture Mechanics and Calibrated Micromechanics Based Models

Extremely low cycle fatigue prediction of steel beam-to-column connection by using a micro-mechanics based fracture model

Multiaxial Low Cycle Fatigue Assessment of Notch Specimens for 10crni3mov Steel and Its Welds

Post-fire mechanical behavior of iron-based shape memory alloy used for structural damping

Prediction of ductile fracture for circular hollow section bracing members under extremely low cycle fatigue

Ductile Fracture Prediction Framework of Low Yield Point Steel LYP225 under Monotonic Loading: Experiment and Simulation

The Numerical Method for Predicting Failure in Single Point Incremental Forming Using a New Anisotropic Ductile Fracture Model

Calibration of micromechanical fracture model parameters for Q355B steel and ER50–6 welds

A Simple Calibrated Ductile Fracture Model and Its Application in Failure Analysis of Steel Connections

Experiment and simulation study on the functional fatigue of shape memory alloy beam actuators

Prediction of Low Cycle Fatigue Crack Growth under Mixed-mode Loading Conditions Using Cohesive Zone Models

Modeling of Ductile Fracture from Shear to Balanced Biaxial Tension for Sheet Metals

Development of improved Manson-Coffin model considering the effect of yield stress under asymmetrical cyclic loading