Abstract:The three-dimensional (3D) sculpturing of glass remains a significant challenge owing to its inherent hard and brittle nature. We develop a novel dynamic multi-focus laser sculpting (DMLS) method tailored for 3D glass fabrication. This method employs two-dimensional (2D) spatial multi-focus beams to form sectional profiles of 3D structures, which are modulated by superimposing the phase of Fresnel lenses and blazed gratings. With dynamic switching of phase diagrams on a spatial light modulator, the multi-focus beam rotates and creates a customized 3D laser-modified region inside the bulk glass. Following chemical etching helps remove the modified zones, forming ultimate 3D morphology on glass surface. The feasibility of this method hinges upon achieving uniform foci energy and narrow spatial foci intervals, essential for the precise removal of modified regions through connected crack channels during etching. We propose an extracting strategy to separate foci with random sequences into several groups to disrupt the periodicity of foci, thereby effectively weakening the unexpected Moiré fringes on the phase diagrams. This strategy enables the forming of dense foci by a single diagram with high uniformity, shortening the interval between foci. Further, for the lower surface roughness and higher precision of 3D structures, optimization of fabrication parameters is applied by experimental and numerical analysis. With the above optimization, the DMLS method is capable of carving diversified 3D glass structures, including hemispheres, cones, pyramids, semi-ellipsoids, and petal-like structures. Our method exhibits considerable versatility in processible structures with shape deviation lower than 1.9 μm, showing substantial potential in glass processing.

Selective laser melting of glass with irregular shaped powder

A simulation model of selective laser melting (SLM) of glass silica monolayer

Structural investigations of Fe-Zr-Si-Cu metallic glass with low glass-forming ability produced in laser powder bed fusion technology

Numerical investigation of laser powder bed fusion of glass

Multimaterial Volumetric Printing of Silica‐Based Glasses

Effects of raw material ratio and post-treatment on properties of soda lime glass-ceramics fabricated by selective laser sintering

Emerging Techniques for Customized Fabrication of Glass

Controlling the Glassy State toward Structural and Mechanical Enhancement: Additive Manufacturing of Bulk Metallic Glass Using Advanced Laser Beam Shaping Technology (Adv. Funct. Mater. 12/2024)

Additive Manufacturing of Silica Glass Using Laser Stereolithography with a Top-Down Approach and Fast Debinding

Dynamic multi-focus laser sculpting of freeform 3D glass microstructures

Experimental investigations on the formation of boundary layers in glass-based additive manufacturing of fused silica fibers by Laser Glass Deposition

Direct additive manufacturing of transparent fused silica glasses using an integrated paste printing and laser in-situ melting technology

Influence of powder characteristics on the structural and the mechanical properties of additively manufactured Zr-based bulk metallic glass

Research and implementation of large-area sintering technology based on image-shaped laser

Investigation of glass bonding and multi-layer deposition during filament-based glass 3D printing

Development and Fabrication of Biocompatible Ti-Based Bulk Metallic Glass Matrix Composites for Additive Manufacturing

Production of spherical polymeric composite powder for selective laser sintering via plasma assisted solid state shear milling: From theory to piezoelectric application

Volumetric Additive Manufacturing of Silica Glass with Microscale Computed Axial Lithography

3D morphological analysis of Fe-based metallic glass surfaces via laser powder bed fusion using a digital microscope

One-photon three-dimensional printed fused silica glass with sub-micron features

Phase-separating resins for light-based three-dimensional printing of oxide glasses