Abstract:The deactivation of NH3-selective catalytic reduction (SCR) catalysts due to NH4HSO4 deposition at low temperatures (< 300 degrees C) is still a significant challenge. In this work, we present a comprehensive mechanism describing the formation, deposition, and reaction of NH4HSO4 on a V2O5/TiO2 catalyst using a combination of theoretical and experimental methods. The results show that NH4HSO4 is mainly formed in the gas phase through the nucleation of SO3, H2O, and NH3 and then deposits onto the catalyst surface. The decomposition of NH4HSO4 on the surface of the V2O5/TiO2 catalyst consists of two steps: NO is reduced by the NH4+ of NH4HSO4 forming N-2 and H2O by transferring an electron to the adjacent vanadium site, followed by a reoxidation of the reduced vanadium site by either O-2 or NO2. At low temperatures, due to the weak reoxidizing ability of O-2, the reaction of NH4HSO4 with NO in the NO/O-2 mixture is rather slow. Adding NO2 can remarkably enhance the decomposition of NH4HSO4 on the catalyst surface. Our results reveal that the rate-determining step of the reaction between NH4HSO4 and NO/O-2 is the reoxidation of the reduced vanadium site and that NO2 is a better reoxidizing agent than O-2, which has been confirmed by X-ray photoelectron spectroscopy analysis and the designed transient response method experiments. Finally, the catalyst sulfur tolerance test has proven that the commercial V2O5-WO3/TiO2 catalyst can successfully maintain its long-term activity for NOx reduction in SO2-contained flue gas at 250 degrees C due to the rapid decomposition of deposited NH4HSO4 on the catalyst surface by the NO/NO2 mixture.

Prominent difference in the deactivation rate and mechanism of V2O5/TiO2 under H2S or SO2 during selective catalytic reduction of NOx with NH3

SO2 Poisoning Mechanism over TiO2-ZrO2 Based Catalyst for Selective Catalytic Reduction of NOx by NH3

SO2-promoted reduction of NO with NH3 over vanadium molecularly anchored on the surface of carbon nanotubes

Exploring the Role of V2O5 in the Reactivity of NH4HSO4 with NO on V2O5/TiO2 SCR Catalysts

Unraveling the Unexpected Offset Effects of Cd and SO2 Deactivation over CeO2-WO3/TiO2 Catalysts for NOx Reduction

Formation and Decomposition of NH4HSO4 During Selective Catalytic Reduction of NO with NH3 over V2O5-WO3/TiO2 Catalysts

SO2 Deactivation Mechanism of MnOx/MWCNTs Catalyst for Low-Temperature Selective Catalytic Reduction of NOx by Ammonia

The Interaction of NH4HSO4 with Vanadium–Titanium Catalysts Modified with Molybdenum and Tungsten

Promotive Effect Of So2 On The Activity Of A Deactivated Commercial Selective Catalytic Reduction Catalyst: An In Situ Drift Study

The Influence of the Pore Structure on the SO2 Tolerance for Selective Catalytic Reduction of NOx with NH3 over MnOx-TiO2/MWCNTs Catalysts

Dual Effect of Sulfation on the Selective Catalytic Reduction of NO with NH3 over MnOx/TiO2: Key Factor of NH3 Distribution

Understanding the Deposition and Reaction Mechanism of Ammonium Bisulfate on a Vanadia SCR Catalyst: A Combined DFT and Experimental Study

SO2 Promoted V2O5-MoO3/TiO2 Catalyst for NH3-SCR of NOx at Low Temperatures

Selective catalytic reduction of NO(x)with NH(3)over TiO(2)supported metal sulfate catalysts preparedviaa sol-gel protocol

Active sites of NO selective catalytic reduction over V2O5-WO3/TiO2

H2O and SO2 Deactivation Mechanism of MnOx/MWCNTs for Low-Temperature SCR of NOx with NH3

Combined Spectroscopic and Theoretical Approach to Sulfur-Poisoning on Cu-Supported Ti-Zr Mixed Oxide Catalyst in the Selective Catalytic Reduction of Nox

Study on SO2 Poisoning and Regeneration of the Low-Temperature Fe–Sn–Mn/TiO2 Catalyst for Simultaneous Removal of NOx and Mercury

Study on the Deactivation of V2O5–WO3/TiO2 Selective Catalytic Reduction Catalysts through Transient Kinetics

Study on SO 2 Poisoning and Regeneration of the Low-Temperature Fe–Sn–Mn/TiO 2 Catalyst for Simultaneous Removal of NO x and Mercury

Novel Methods for Assessing the SO2 Poisoning Effect and Thermal Regeneration Possibility of MOx-WO3/TiO2 (M = Fe, Mn, Cu, and V) Catalysts for NH3-SCR