Abstract:The dynamics and control of spacecraft have been widely studied because of their technological significance. In the classical case the spacecraft is assumed to consist of a single rigid body with three-axis torque inputs and with attitude and rate sensing. In practice, however, the situation may be far more complex. For example, any component of the spacecraft that deforms relative to other components will entail a change in the spacecraft mass distribution; in effect, the spacecraft becomes a multibody system. Similarly, structural flexibility and fuel slosh give rise to vibrational degrees of freedom. Spacecraft control is also exacerbated by sensor and actuator nonlinearities. Traditional actuation devices such as thrusters, reaction wheels, momentum wheels, and control moment gyros entail amplitude and rate saturation constraints, gyroscopic coupling, and coupling between translational and attitude dynamics. Additional difficulties arise when accounting for gravitational effects and external disturbances. All of these issues have technological implications. A fundamental difficulty associated with spacecraft technology is the fact that ground-based testing must occur in a 1-g environment whereas the hardware will operate under zero-g conditions. Consequently, spacecraft control engineering must depend on first-principles analysis as well as extrapolation from 1-g testing. The purpose of this paper is to describe a laboratory-based testbed that will be used to explore various issues and concepts in spacecraft dynamics and control. This testbed is based on a triaxial air bearing to allow experiments involving large-angle, three-axis motion. As a precursor to this testbed, we have also developed an air spindle testbed which allows single-axis rotation.

The dynamic environment simulator as a robotic system: kinematic issues

Dynamic Modeling of a High-Dynamic Flight Simulator

Dynamic Modeling for the 5-Dof Air Bearing Spacecraft Simulator

Historical survey of kinematic and dynamic spacecraft simulators for laboratory experimentation of on-orbit proximity maneuvers

Study On Dynamic Modeling And Control Simulation Of Space Robot

Dynamic simulation system of space robot with series rotary joint

Survey of modeling, planning, and ground verification of space robotic systems

Development of air spindle and triaxial air bearing testbeds for spacecraft dynamics and control experiments

Free-flying robots in space: an overview of dynamics modeling, planning and control

Dynamic Control of A Space Robot System with No Thrust Jets Controlled Base

Dynamics modeling and simulation analysis of 6-DOF space manipulator

A Dynamic Model of a Skydiver With Validation in Wind Tunnel and Free Fall

Simulation Modeling of Highly Dynamic Omnidirectional Mobile Robots Based on Real-World Data

An aviation accident report data-driven approach to scenario design for a centrifuge-based dynamic flight simulator

Dynamic Modeling and Simulation for a Supermaneuverable Aircraft in Disturbance of Wind Field

Validating Robotics Simulators on Real-World Impacts

Nonlinear dynamic modeling and simulation of an atmospheric re-entry spacecraft

Automatic mass balancing and design of a six degrees-of-freedom air bearing spacecraft simulator

Emulating On-Orbit Interactions Using Forward Dynamics Based Cartesian Motion

Dynamic modelling and parameter identification of a 3-DOF flight simulator platform

Dynamic Modeling and Simulation of a Rotational Inverted Pendulum