Abstract:Many dynamic simulations of a rotor with a journal bearing employ non-linear fluid-film lubrication models and calculate the bearing coefficients at each time step. However, calculating such a simulation is tedious and computationally expensive. This paper presents a simplified dynamic simulation model of a vertical rotor with tilting pad journal bearings under constant and variable (transient) rotor spin speed. The dynamics of a four-shoes tilting pad journal bearing are predefined using polynomial equations prior to the unbalance response simulations of the rotor-bearing system. The Navier–Stokes lubrication model is solved numerically, with the bearing coefficients calculated for six different rotor speeds and nine different eccentricity amplitudes. Using a MATLAB inbuilt function (poly53), the stiffness and damping coefficients are fitted by a two-dimensional polynomial regression and the model is qualitatively evaluated for goodness-of-fit. The percentage relative error (RMSE%) is less than 10%, and the adjusted R-square () is greater than 0.99. Prior to the unbalance response simulations, the bearing parameters are defined as a function of rotor speed and journal location. The simulation models are validated with an experiment based on the displacements of the rotor and the forces acting on the bearings. Similar patterns have been observed for both simulated and measured orbits and forces. The resultant response amplitudes increase with the rotor speed and unbalanced magnitude. Both simulation and experimental results follow a similar trend, and the amplitudes agree with slight deviations. The frequency content of the responses from the simulations is similar to those from the experiments. Amplitude peaks, which are associated with the unbalance force (1 × Ω) and the number of pads (3 × Ω and 5 × Ω), appeared in the responses from both simulations and experiments. Furthermore, the suggested simulation model is found to be at least three times faster than a classical simulation procedure that used FEM to solve the Reynolds equation at each time step.

Dynamic Modeling and Simulation of a Rotational Inverted Pendulum

Dynamic, modeling and simulation of an underactuated system

Stabilize the planar single inverted pendulum based on LQR.

Modeling and Simulation of a Flexible Inverted Pendulum System

Dynamic analysis and control PID path of a model type gantry crane

Dynamic modeling and control of a spherical pendulum with a VSCMG

Modeling and Simulation of Inverted Pendulum Based on Modelica and Simforge

Design of Spatial Inverted Pendulum System

Modeling and simulation for a triple inverted-pendulum

A Complex Overview of Modeling and Control of the Rotary Single Inverted Pendulum System

Experiment Design on Inverted Pendulum System

Dynamic analysis of simple pendulum model under variable damping

Solving the angular velocity of the physical pendulum motion by some numerical methods

Modelling and Controller Design for a Five-Link Inverted Pendulum

Modeling and Control of One-stage Inverted Pendulum Body Based on Matlab

Mathematical modeling of elastic inverted pendulum control system

Speed-Dependent Bearing Models for Dynamic Simulations of Vertical Rotors

The Design and Realization of a Rotary Inverted Pendulum Based on Efficient Control

Chaotic dynamics analysis of double inverted pendulum with large swing angle based on Hamiltonian function

Study on Swing-up and stability Control for Single Link Rotary Inverted Pendulum

Dynamic simulation system of space robot with series rotary joint