Abstract:Mining extremely thick coal seams under layer of loose unconsolidated Cenozoic alluvium is common in north China. However, this may cause serious consequences including breaking down workface, submerging equipment, even serious flooding accident and casualties, because there is an alluvium aquifer composed of sand, clay, and gravels directly overlying above coal seams. Formulating preventive and control measures in advance is extremely important to a mine. In this paper, case study of water and sand inrush prevention is taken in Xiexin coal mine. A 15.5-m thick coal seam is threatened by unconsolidated Cenozoic alluvium water hazard during mining. By the research and exploitation of hydrological characteristics and strata lithology of unconsolidated Cenozoic alluvium, the lowermost layer in some areas is the layer of clay with good water resistance, and part of areas is permeable water-bearing sand mixed with gravel belonging to weak aquifer, which provide an advantageous condition to possibly set and optimally design sand-proof and caved-proof pillars. Considering its geological and hydrogeological characteristics, slice long-wall mining technology which extracts thick coal seams from top to bottom by dividing it into two slices is employed. Based on observations carried out in the field and physical model testing in the lab, strata failures induced by slice long-wall mining were investigated. The study indicated that the maximum height of the caved zone for upper slice was about 5.62 times of the upper slice mining height and the comprehensive height of the caved zone for two slices was about 4.71 times of the total mining height of two slices. The height of caved zone derived from physical model testing was consistent with the height obtained from field measurements. According to the hydrogeology of alluvium, overlying strata lithology, and mining conditions, the optimal design of sand-proof pillar at areas with weak water rich aquifer, and caved-proof pillar at areas with the lowermost layer of clay for workface 1702, workface 1704, and workface 1706 were given for safe production. The optimal design and technique measures, such as slice mining and reducing the thickness of extractions within the upper or lower slice, were successfully practiced. Overall, the conclusions are of engineering significance for coal mines suffering from water and sand inrush of unconsolidated Cenozoic alluvium.

Determination of Save Excavation Criteria in Velenje Coal Mine

Study on the Laws of Overlying Strata Movement of Repeated Mining of Close Distance Thick Coal Seam Under Large Surface Water

Influence of the Depth of Shallow Workings on the Probability of Sinkhole Formation and Determination of the Contribution of Mines to the Resulting Risk

Study on Overlying Strata Movement and Surface Subsidence of Coal Workfaces with Karst Aquifer Water

Experimental and Numerical Simulations of Pore Structures and Seepage Characteristics of Deep Sandstones

Groundwater Chemistry and Stratification in the Flooded Hard-Coal Mine Shaft “Nowy I” (Nowa Ruda Region, SW Poland)

Applying CFD Model Studies to Determine Zones at Risk of Methane Explosion and Spontaneous Combustion of Coal in Goaves

Prevention of water and sand inrush during mining of extremely thick coal seams under unconsolidated Cenozoic alluvium

Slope Stability Numerical Analysis and Landslide Prevention of Coal Mine Waste Dump under the Impact of Rainfall—A Case Study of Janina Mine, Poland

A Multi-method Approach for Estimating the Failure Depth of Coal Seam Floor in a Longwall Coal Mine in China

ENGINEERING GEOLOGICAL CHARACTERISTICS OF COAL DEPOSIT DIMNJAČE (BUGOJNO BASIN)

Simulation and On-Site Detection of the Failure Characteristics of Overlying Strata under the Mining Disturbance of Coal Seams with Thin Bedrock and Thick Alluvium

Quantitative evaluation and planning method of shallow surface water response in multi-face mining—Case study regarding Zhuanlongwan coal mine

Risk assessment and cause analysis of water inrush in thin bedrock areas with shallow coal seams for safe, water-conserving mining

Modeling and Complex Analysis of the Topology Parameters of Ventilation Networks When Ensuring Fire Safety While Developing Coal and Gas Deposits

Estimating dewatering in an underground mine by using a 3D finite element model

Mine Water Inrush Forecasting during the Mining under Waters

Overburden failure and water-sand mixture outburst conditions of weakly consolidated overlying strata in Dananhu No.7 coal mine

Bed Separation Formation Mechanism and Water Inrush Evaluation in Coal Seam Mining under a Karst Cave Landform

Safety Mining Technology of Coal Seams in Weathered Zone Based on Ground J-Type Pregrouting Reinforcement

Experimental evaluation of physical, mechanical, and permeability parameters of key aquiclude strata in a typical mining area of China