Abstract:An in situ hybrid crosslinking polymerized TiO2 nanoparticles are proposed for the preparation of a highly stable polymer composite electrolyte (NHCPE) with an extremely high ionic conductivity of 1.74 × 10−3 S cm−1 and a lithium‐ion transfer number of 0.725 at 25 °C. The proposed PDOL@nanoTiO2 (NHCPE) greatly inhibits the defects of easy agglomeration of composite electrolytes, and solves the problems of easy decomposition, low thermal stability, and poor safety of polyether electrolytes. The composite solid electrolyte, which combines the advantages of inorganic conductors and organic polymer electrolytes, has become a crucial strategy for the construction of solid‐state batteries. However, the physical deposition and agglomeration of traditional composite fillers seriously affect their structural uniformity and ion transport performance, and the construction of uniform and stable composite electrolytes is still an insurmountable challenge. Herein, a strategy of in situ hybrid crosslinking polymerization of TiO2 nanoparticles is proposed for highly stable polymer composite electrolytes (NHCPE) with an ultrahigh ionic conductivity of 1.74 × 10−3 S cm−1 at 25 °C, and a high lithium‐ion transference number of 0.725. These properties enable the composed lithium symmetric battery to be stably deposited/plating off at 0.5 mA cm−2 for more than 1000 h. Moreover, the assembled LFP|PDOL@nanoTiO2|Li battery exhibits a superior specific discharge capacity of 142.6 mAh g−1 at 1 C and 25 °C, and an ultrahigh capacity retention rate of 90% after 1000 cycles. The proposed PDOL@nanoTiO2 NHCPE greatly inhibits the defects of easy agglomeration of composite electrolytes, solves the problems of easy decomposition, low thermal stability, and poor safety of polyether electrolytes, and opens up a new way for the design and industrial application of high‐stability composite polymer electrolytes.

Design and fabrication of PEO‐HPMC@Ht composite solid‐state electrolytes in all‐solid‐state lithium battery

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

Solution-processed 2D hectorite nanolayers for high-efficient composite solid-state electrolyte

Hybrid Crosslinked Solid Polymer Electrolyte via In‐Situ Solidification Enables High‐Performance Solid‐State Lithium Metal Batteries

Hollow Nanotubular Clay Composited Comb-Like Methoxy Poly(ethylene Glycol) Acrylate Polymer As Solid Polymer Electrolyte for Lithium Metal Batteries

Cationic Cyclopropenium-Based Hyper-Crosslinked Polymer Enhanced Polyethylene Oxide Composite Electrolyte for All-Solid-State Li-S Battery

Flexible PVDF-HFP based hybrid composite solid electrolyte membrane co-filled with hydroxypropyl methyl cellulose and Li6.4La3Zr1.4Ta0.6O12 for high-performance solid-state lithium batteries

Design, fabrication and application of PEO/CMC-Li @PI hybrid polymer electrolyte membrane in all-solid-state lithium battery

Synergistic effect of Ti3C2Tx MXene/PAN nanofiber and LLZTO particles on high-performance PEO-based solid electrolyte for lithium metal battery

Cyclodextrin-Integrated PEO-Based Composite Solid Electrolytes for High-Rate and Ultrastable All-Solid-State Lithium Batteries

Hybrid solid electrolyte with the combination of LATP ceramic and PEO polymer by a solvent-free procedure

Hybrid Electrolyte Based on PEO and Ionic Liquid with In Situ Produced and Dispersed Silica for Sustainable Solid-State Battery

Composite polymer electrolyte based on poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) for solid-state batteries

Advanced High-Voltage Electrolyte Design Using Poly(ethylene oxide) and High-Concentration Ionic Liquids for All-Solid-State Lithium Metal Batteries

Hydrogen Bonding Enhanced SiO2/PEO Composite Electrolytes for Solid-State Lithium Batteries

Rational Design of High-Performance PEO/Ceramic Composite Solid Electrolytes for Lithium Metal Batteries

High-performance intercalated composite solid electrolytes for lithium metal battery

PEO/hollow Mesoporous Polymer Spheres Composites As Electrolyte for All Solid State Lithium Ion Battery

In Situ Hybrid Crosslinking Polymerization of Nanoparticles for Composite Polymer Electrolytes to Achieve Highly‐Stable Solid Lithium–Metal Batteries

Composite Electrolytes Prepared by Improving the Interfacial Compatibility of Organic-Inorganic Electrolytes for Dendrite-Free, Long-Life All-Solid Lithium Metal Batteries.

Porous polyamine/PEO composite solid electrolyte for high performance solid-state lithium metal batteries