Abstract:Thermophotovoltaic (TPV) device is a thermoelectric conversion method with great application prospects. In the far-field regime, the thermoelectric power is usually small due to the Planck blackbody radiation limit, but can be substantially enhanced in the near-field regime where evanescent waves will participate in the heat transfer by tunneling. In this aspect, the surface optical density of state is a key factor that will determine the transfer conversion of thermal photons. Plasmonic or phononic resonance materials have been discussed in the literature to acquire large heat flux. Besides, metamaterial is another way to pursue the design freedoms for the same purpose. In this work, we propose a [CaF2/W]n multilayer based infrared hyperbolic metamaterial (HMM) with high surface density of states as an emitter of a high-performance TPV cell made of an InSb p-n junction (energy bandgap = 0.17 eV). The effective medium theory (EMT) is utilized to describe the electromagnetic behavior of the HMM. The near-field heat flux is calculated based on electrodynamic wave theory and Green's function method, and the photocurrent of thermophotovoltaic device is derived using diffusion equation for semiconductor. For comparison, we design three different radiators, i.e. tungsten film (W), [GaF2/W]n multilayer hyperbolic metamaterial (HMM), and tungsten-grounded HMM (WHMM). Compared with the pure tungsten radiator, the artificial structure exhibits the hyperbolic dispersion characteristic in a wide frequency range, which gives rise to a higher local density of states, in particular in the hyperbolic-to-elliptic spectral transition region. As a result, the radiation power and the energy conversion efficiency are greatly enhanced, which are more easily realized by a matched emission band achieved by the structural design. We find that the thermophotovoltaic device with WHMM radiator has a similar power and conversion efficiency to that with the HMM radiator. The influence of the substrate can be ignored when the hyperbolic metamaterial is thicker than 140 nm, very beneficial to the actual fabrication of the device. By our system, with multilayer hyperbolic metamaterial (HMM) radiator, a high electric power >1 W/m2 and a conversion efficiency about 11% can be obtained at a bias temperature of 200 K and a 100 nm vacuum gap. Compared with nanowire arrays or natural hyperbolic material, the multilayer structure proposed in this paper has obvious advantages in bandwidth and manufacturing and may find important applications in near-field thermophotovoltaic device and other relevant areas.

Tungsten nanodisc-based spectrally-selective polarization-independent thermal emitters

High-performance near-field thermophotovoltaic device with CaF<sub>2</sub>/W multilayer hyperbolic metamaterial emitter

High-performance near-field thermophotovoltaic device with CaF<sub>2</sub>/W multilayer hyperbolic metamaterial emitter

Tungsten–Carbon Nanotube Composite Photonic Crystals as Thermally Stable Spectral‐Selective Absorbers and Emitters for Thermophotovoltaics

Tungsten Nanowire Based Hyperbolic Metamaterial Emitters for Near-field Thermophotovoltaic Applications

Optical Tunneling Mediated Sub-Skin-Depth High Emissivity Tungsten Radiators

Four-layer Metallodielectric Emitter for Spectrally Selective Near-Field Radiative Transfer in Nano-Gap Thermophotovoltaics

Narrowband Diffuse Thermal Emitter Based on Surface Phonon Polaritons

A Novel Selective Thermophotovoltaic Emitter Based on Multipole Resonances

High-Selectivity Planar Thermal Emitter with a Stable Temperature over 1400 K for a Thermophotovoltaic System

A tungsten-based metamaterial emitter for solar thermophotovoltaic systems

Tunable Narrowband Silicon-Based Thermal Emitter with Excellent High-Temperature Stability Fabricated by Lithography-Free Methods

Tunable Narrowband Mid-Infrared Thermal Emitter with a Bilayer Cavity Enhanced Tamm Plasmon.

Tunable Dual-Band Thermal Emitter Consisting of Single-Sized Phase-Changing GST Nanodisks

Performance Analysis of a Near-Field Thermophotovoltaic Device with a Metallodielectric Selective Emitter and Electrical Contacts for the Photovoltaic Cell

Selective emitter with core–shell nanosphere structure for thermophotovoltaic systems

Large-Area, Lithography-Free, Narrow-Band And Highly Directional Thermal Emitter

Tailorable Bandgap-Dependent Selective Emitters for Thermophotovoltaic Systems

High Efficiency Thermophotovoltaic Emitter by Metamaterial-Based Nano-Pyramid Array

Simultaneous Single-Peak and Narrowband Thermal Emission Enabled by Hybrid Metal-Polar Dielectric Structures

Wavelength-tunable mid-infrared thermal emitters with a non-volatile phase changing material.

Tungsten nanodisc-based spectrally-selective polarization-independent thermal emitters

High-performance near-field thermophotovoltaic device with CaF<sub>2</sub>/W multilayer hyperbolic metamaterial emitter

High-performance near-field thermophotovoltaic device with CaF&lt;sub&gt;2&lt;/sub&gt;/W multilayer hyperbolic metamaterial emitter

Tungsten–Carbon Nanotube Composite Photonic Crystals as Thermally Stable Spectral‐Selective Absorbers and Emitters for Thermophotovoltaics

Tungsten Nanowire Based Hyperbolic Metamaterial Emitters for Near-field Thermophotovoltaic Applications

Optical Tunneling Mediated Sub-Skin-Depth High Emissivity Tungsten Radiators

Four-layer Metallodielectric Emitter for Spectrally Selective Near-Field Radiative Transfer in Nano-Gap Thermophotovoltaics

Narrowband Diffuse Thermal Emitter Based on Surface Phonon Polaritons

A Novel Selective Thermophotovoltaic Emitter Based on Multipole Resonances

High-Selectivity Planar Thermal Emitter with a Stable Temperature over 1400 K for a Thermophotovoltaic System

A tungsten-based metamaterial emitter for solar thermophotovoltaic systems

Tunable Narrowband Silicon-Based Thermal Emitter with Excellent High-Temperature Stability Fabricated by Lithography-Free Methods

Tunable Narrowband Mid-Infrared Thermal Emitter with a Bilayer Cavity Enhanced Tamm Plasmon.

Tunable Dual-Band Thermal Emitter Consisting of Single-Sized Phase-Changing GST Nanodisks

Performance Analysis of a Near-Field Thermophotovoltaic Device with a Metallodielectric Selective Emitter and Electrical Contacts for the Photovoltaic Cell

Selective emitter with core–shell nanosphere structure for thermophotovoltaic systems

Large-Area, Lithography-Free, Narrow-Band And Highly Directional Thermal Emitter

Tailorable Bandgap-Dependent Selective Emitters for Thermophotovoltaic Systems

High Efficiency Thermophotovoltaic Emitter by Metamaterial-Based Nano-Pyramid Array

Simultaneous Single-Peak and Narrowband Thermal Emission Enabled by Hybrid Metal-Polar Dielectric Structures

Wavelength-tunable mid-infrared thermal emitters with a non-volatile phase changing material.

High-performance near-field thermophotovoltaic device with CaF<sub>2</sub>/W multilayer hyperbolic metamaterial emitter