Tungsten Nanowire Based Hyperbolic Metamaterial Emitters for Near-field Thermophotovoltaic Applications

Jui-Yung Chang,Yue Yang,Liping Wang

DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2015.03.087

2014-10-11

Abstract:Recently, near-field radiative heat transfer enhancement across nanometer vacuum gaps has been intensively studied between two hyperbolic metamaterials (HMMs) due to unlimited wavevectors and high photonic density of state. In this work, we theoretically analyze the energy conversion performance of a thermophotovoltaic (TPV) cell made of In0.2Ga0.8Sb when paired with a HMM emitter composed of tungsten nanowire arrays embedded in Al2O3 host at nanometer vacuum gaps. Fluctuational electrodynamics integrated with effective medium theory and anisotropic thin-film optics is used to calculate the near-field radiative heat transfer. It is found that the spectral radiative energy is enhanced by the epsilon-near-zero and hyperbolic modes at different polarizations. As a result, the power output from a semi-infinite TPV cell is improved by 1.85 times with the nanowire HMM emitter over that with a plain tungsten emitter at a vacuum gap of 10 nm. Moreover, by using a thin TPV cell with 10 um thickness, the conversion efficiency can be greatly improved from 19.5% to 31.5% without affecting the power generation, due to the total internal reflection occurring at the bottom cell interface that minimizes the sub-bandgap spectral radiative energy. Furthermore, the effects of a TPV cell and a nanowire emitter with finite thicknesses are also studied. The result shows that the maximum efficiency of 32.2% is achieved with an optimal cell thickness of 3 um while the nanowire HMM emitter should be thick enough to be opaque. The fundamental understanding and insights obtained here will facilitate the design and application of novel materials in enhancing near-field TPV energy conversion.

Mesoscale and Nanoscale Physics,Optics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: how to enhance the energy conversion performance of near - field thermophotovoltaic (TPV) systems by using hyperbolic metamaterial (HMM) emitters based on tungsten nanowire arrays, especially the near - field radiative heat transfer in nanoscale vacuum gaps. Specifically, the research aims to:

1. **Improve energy conversion efficiency**: By introducing HMM emitters with special optical properties, such as tungsten nanowire arrays embedded in aluminum oxide (Al₂O₃), to enhance near - field radiative heat transfer, thereby increasing the energy conversion efficiency of TPV cells.

2. **Optimize system design**: Study the influence of different parameters (such as nanowire filling ratio, vacuum gap distance, TPV cell thickness, etc.) on near - field radiative heat transfer and energy conversion performance, providing a theoretical basis for optimizing system design.

3. **Overcome material mismatch problems**: Since TPV receivers are usually made of semiconductor materials, while emitters require high - temperature - stable metal materials (such as tungsten), the material mismatch between the two limits the improvement of near - field TPV performance. This research explores the possibility of using HMM emitters to overcome this challenge.

### Specific problem description

- **Enhancement of near - field radiative heat transfer**: The near - field radiative heat transfer of traditional materials in nanoscale vacuum gaps is limited, while HMM emitters can significantly enhance this transfer through their unique optical properties (such as epsilon - near - zero (ENZ) mode and hyperbolic mode).

- **Spectral - selective absorption**: By optimizing the design of HMM emitters, the absorption efficiency of TPV cells for photons in a specific wavelength range can be improved, thereby increasing power output and reducing wasted energy.

- **Thin - film effect**: The study found that using TPV cells with a limited thickness can effectively reduce the spectral radiative energy below the bandgap, thereby improving the conversion efficiency.

### Research methods

This research uses the method of fluctuating electrodynamics combined with effective medium theory and anisotropic thin - film optics to calculate the near - field radiative heat transfer and evaluate the influence of different parameters on the performance of TPV systems. Through these theoretical analyses, the researchers revealed the potential of HMM emitters in near - field TPV applications and proposed suggestions for optimized design.

### Main conclusions

- Using tungsten nanowire HMM emitters can increase the power output of TPV cells by about 1.85 times under a 10 - nm vacuum gap.
- By using 10 - μm - thick TPV cells, the conversion efficiency can be increased from 19.5% to 31.5% without affecting the power output.
- When the optimal TPV cell thickness is 3 μm, the conversion efficiency can reach 32.2%.

These findings provide an important theoretical basis and technical guidance for the future development of efficient near - field TPV systems.