Abstract:Treatment of highly contaminated wastewaters containing refractory or toxic organic contaminants (e.g. industrial wastewaters) is becoming a global challenge. Most technologies focus on efficient degradation of organic contaminants. Here we improve the cathode/FeIII/peroxydisulfate (PDS) technology by turning down the current density and develop an innovative mechanism for organic contaminants abatement, namely polymerization rather than degradation, which allows simultaneous contaminants removal and resource recovery from wastewater. This polymerization leads to organic-particles (suspended solid organic-polymers) formation in bulk solution, which is demonstrated by eight kinds of representative organic contaminants. Taking phenol as a representative, 83% of PDS is saved compared to degradation process, with 87.2% of DOC removal. The formed suspended solid organic-polymers occupy 59.2% of COD of the original organics in solution, and can be easily separated from aqueous solution by sedimentation or filtration. The separated organic-polymers are a series of polymers coupled by phenolic monomers, as confirmed by FTIR and ESI-MS analyzes. The energy contained in the recovered organic polymers (4.76 × 10-5 kWh for 100 mL of 1 mM phenol solution in this study) can fully compensate the consumed electrical energy (2.8 × 10-5 kWh) in the treatment process. A representative polymerization model for this process is established, in which the SO4•- and HO• generated from PDS activation initiate the polymerization and improve the polymerization degree by the production of oligomer intermediates. A practical coking wastewater treatment is carried out to verify the research results and get positive feedback, with 56.0% of DOC abatement and the suspended solid organic-polymers accounts for 42.5% of the total COD in the raw wastewater. The energy consumption (47 kWh/kg COD, including electricity and PDS cost) is lower than the values in previous reports. This study provides a novel method for industrial wastewater treatment based on polymerization mechanism, which is expected to recover resources while removing pollutants with low consumption.

Resourcelized conversion of poultry feces to ordered carbon with electron poor/rich microregions for water purification induced by peroxymonosulfate

Zero-added conversion of chicken manure into dual-reaction-center catalyst for pollutant degradation triggered by peroxymonosulfate

Enhanced Conversion from H2O2 to 1O2 on Cu–N Centers: Investigation of Mechanisms and Application in Alkaline Wastewater Treatment

Resourcelized conversion of livestock manure to porous cage microsphere for eliminating emerging contaminants under peroxymonosulfate trigger

New sustainable utilization approach of livestock manure: Conversion to dual-reaction-center Fenton-like catalyst for water purification

Selective Conversion of Organic Pollutant P-Chlorophenol to Formic Acid Using Zeolite Fenton Catalyst

Conversion of Agricultural Waste to Porous Hydrochar for Non-Metallic Activation of Persulfate to Phenol Degradation Via Non-Radical-dominated Processes: Singlet Oxygen and Electron Transfer

Exploring electron-transfer pathways in co-pyrolyzed waste-derived carbocatalyst for enhanced peroxydisulfate activation

Facile Synthesis of Fine-Grained CoFe2O4 Anchored on Porous Carbon for Simultaneous Removal of Tetracycline and Arsenite Via Peroxymonosulfate Activation

Highly dispersed CoFe2O4 spinel on biomass-derived 3D porous carbon framework for much enhanced Fenton-like reactions

Upcycling biomass waste into Fe single atom catalysts for pollutant control

Selective Separation Catalysis Membrane for Highly Efficient Water and Soil Decontamination via a Persulfate-Based Advanced Oxidation Process

Enhanced Ciprofloxacin Degradation by Electrochemical Activation of Persulfate Using Iron Decorated Carbon Membrane Cathode: Promoting Direct Single Electron Transfer to Produce 1O2

One-step solvothermal construction of coral reef-like FeS 2 /biochar to activate peroxymonosulfate for efficient organic pollutant removal

One-step Solvothermal Construction of Coral Reef-Like FeS2/biochar to Activate Peroxymonosulfate for Efficient Organic Pollutant Removal

Treatment of contaminants by a cathode/FeIII/peroxydisulfate process: Formation of suspended solid organic-polymers

Efficient activation of peroxymonosulfate by iron-containing mesoporous silica catalysts derived from iron tailings for degradation of organic pollutants

Al/Ca-doped CuFe2O4 prepared from waste printed circuit boards as a magnetic peroxymonosulfate activator for the degradation of organic pollutants

Pomelo peel biomass derived highly active advanced-oxidation-process catalyst: Complete elimination of organic pollutants

Highly Dispersed Fe7S8 Anchored on Sp2/sp3 Hybridized Carbon Boosting Peroxymonosulfate Activation for Enhanced EOCs Elimination Though Singlet Oxygen-Dominated Nonradical Pathway

Iron containing sludge-derived carbon towards efficient peroxymonosulfate activation: Active site synergy, performance and alternation mechanism