Heterogeneous activation of persulfate by supporting ferric oxalate onto activated carbon fibers for organic contaminants removal

Longjun Rao,Yunfei Yang,Xiudan Liu,Yifei Huang,Mingxing Chen,Yuyuan Yao,Wentao Wang

DOI: https://doi.org/10.1016/j.materresbull.2020.110919

IF: 5.6

2020-10-01

Materials Research Bulletin

Abstract:The development of highly efficient and environmentally friendly catalyst to activate persulfate (PS) is a promising technology for contaminants removal. Herein, a novel heterogeneous catalyst () was designed by supporting ferric oxalate (FeOxa) onto activated carbon fibers (ACFs). could activate PS to achieve a removal of 96.8% for Reactive Red M-3BE (RR M-3BE) within 20 min and the apparent rate constant (kobs) was 3.6 times higher than that of FeOxa/PS system. Moreover, was capable of excellent recyclability and a broad pH adaptability (3.0–10.0). Radical capturing experiments indicated that sulfate, hydroxyl and superoxide radicals played a key role for contaminants removal. Interestingly, the kobs of RR M-3BE was unexpectedly 4 times enhancement after the introduction of p-benzoquinone, which is very different from the previously system with a negative influence. This study will open a promising avenue for building highly efficient and eco-friendly catalyst to remediate contaminated water.

materials science, multidisciplinary

What problem does this paper attempt to address?

The paper mainly addresses the following issues: 1. **Development of Efficient and Environmentally Friendly Catalysts**: The research team designed a novel heterogeneous catalyst (FeOxa@ACFs) by loading iron oxalate (FeOxa) onto activated carbon fibers (ACFs) to activate persulfate (PS) for the effective removal of organic pollutants. 2. **Pollutant Removal Efficiency**: Within 20 minutes, this catalyst can achieve a 96.8% removal rate of Reactive Red M-3BE dye, and its apparent rate constant (\(k_{\text{obs}}\)) is 3.6 times higher than that of the FeOxa/PS system. 3. **Wide pH Adaptability**: FeOxa@ACFs exhibit good pH adaptability, effectively removing pollutants in a pH range from 3.0 to 10.0. 4. **Catalyst Recyclability**: FeOxa@ACFs have excellent recyclability, maintaining a 95.4% removal efficiency after 5 cycles. 5. **Removal of Various Pollutants**: Besides Reactive Red M-3BE, this catalyst can effectively remove multiple pollutants such as sulfamethazine (SD), ciprofloxacin (CIP), 8-hydroxyquinoline (8-HQ), and phenol. 6. **Role of Reactive Oxygen Species**: Experiments show that sulfate radicals, hydroxyl radicals, and superoxide radicals play a key role in the pollutant removal process. 7. **Positive Influence of p-Benzoquinone**: The study found that p-benzoquinone, usually a superoxide radical scavenger, unexpectedly promoted the generation of reactive oxygen species in this system, significantly enhancing pollutant removal efficiency, which is different from previous research results. In summary, this study provides a new perspective for developing efficient and environmentally friendly catalysts for water pollution control.

Heterogeneous activation of persulfate by supporting ferric oxalate onto activated carbon fibers for organic contaminants removal

Activation of Persulfate by Stability-Enhanced Magnetic Graphene Oxide for the Removal of 2,4-Dichlorophenol

Activation of persulfate by iron‐loaded soybean straw biochar for efficient degradation of dye contaminants: Synthesis, performance, and mechanism

High-efficiency degradation of organic pollutants with Fe, N co-doped biochar catalysts via persulfate activation

Persulfate activation by novel iron–carbon composites for organic contaminant removal: Performance, mechanism, and DFT calculations

Pyrite-activated persulfate for simultaneous 2,4-DCP oxidation and Cr(VI) reduction

Activation of peroxymonosulfate by Fe-N complexes embedded within SBA-15 for removal of organic contaminants via production of singlet oxygen

Enhanced non-radical activation of persulfate with pompon-like NiO microspheres for removing sulfamethoxazole in water

Towards advanced removal of organics in persulfate solution by heterogeneous iron-based catalyst: A review

Ultrafast degradation of organic pollutants in an Fe3O4-CoS2-x activated persulfate catalytic system with an Fe-Co catalytic cycle involving oxygen and sulfur vacancies

Ferrous oxalate covered ZVI through ball-milling for enhanced catalytic oxidation of organic contaminants with persulfate

Synergistically enhanced heterogeneous activation of persulfate for aqueous carbamazepine degradation using Fe3O4@SBA-15

Persulfate activation by two-dimensional MoS2 confining single Fe atoms: Performance, mechanism and DFT calculations

New insight into the mechanism of electro-assisted pyrite minerals activation of peroxymonosulfate: Synergistic effects, activation sites and electron transfer

Rapid activation of peroxymonosulfate with iron(III) complex for organic pollutants degradation via a non-radical pathway

Heterogeneous activation of persulfate by iron/manganese binary oxides for effective bisphenol A degradation

Heterogeneous activation of persulfate by activated carbon supported iron for efficient amoxicillin degradation

Rational Regulation of Peroxymonosulfate Activation over Porous Co3O4 with Carbon Coating to Boost Utilization Efficiency of Peroxymonosulfate and Achieve Rapid Removal of Pollutants.

Accelerated Fe3+/Fe2+ cycle in Mo2C-based Fe catalyst to promote peroxymonosulfate activation

Phytic acid-modulated iron phosphide/biochar catalyst activates persulfate for rapid sulfamethoxazole removal: Synergy between iron phosphides and biochar

Heterogeneous catalytic activation of persulfate for the removal of rhodamine B and diclofenac pollutants from water using iron-impregnated biochar derived from the waste of black seed pomace