Abstract:The possibility of using geopolymer instead of Portland cement could effectively reduce carbon dioxide emissions from cement manufacturing. Fibre-reinforced self-compacting geopolymers have great potential in civil engineering applications, such as chord member grouting for concrete-filled steel tubular truss beams. However, to the best of the authors’ knowledge, the quantitative relationship between FF and the properties of the fibre-reinforced geopolymer has been rarely reported. In this research, 26 groups of mixtures were used to study the influence of the polypropylene fibre factor (FF) on the flowability and mechanical properties and also the compactness of the fibre-reinforced self-compacting geopolymer. At the same volume fraction, geopolymers with long fibres present worse flowability than those having short fibres due to the easier contacting of long fibres. By growing the FF the influence of fibre addition on the V-funnel flow rate is more significant than the slump spread. This can be ascribed to the consequence of fibre addition and friction by the V-funnel which estimates the restrained deformability. For FF lesser than critical factor Fc = 100, influence of fibres is negligible and fibres are far apart from each other and, thus, they cannot restrict cracking under load and transfer the load to improve the mechanical properties. For FF between the Fc = 100 and density factor Fd = 350, a noteworthy enhancement of mechanical properties was obtained and the geopolymer was still adequately workable to flow by weight of self, without any symbols of instability and fibre clumping. Under this condition, better fibre dispersal and reinforcing productivity can lead to better hardened properties. For FF higher than Fd = 350, fibres tend to come to be entwined together and form clumping resulting from the fibre balling, resulting in worse hardened properties. This research offers a sensible basis for the application of the workability regulator of the fresh properties of fibre-reinforced geopolymer as an operative way to basically obtain ideal mechanical properties.

Rheological area division method for coupling process parameters to fabricate geopolymer foams with optimized pore structures and mechanical strength

Quantitative characterization and control mechanism of pore structure in geopolymer foams with addition of various surfactants

Multi-performance Optimization of Low-Carbon Geopolymer Considering Mechanical, Cost, and CO2 Emission Based on Experiment and Interpretable Learning

Influence of Polypropylene Fibre Factor on Flowability and Mechanical Properties of Self-Compacting Geopolymer

Performance Optimization of FA-GGBS Geopolymer Based on Response Surface Methodology

Preparation and performance optimization of fly ash- slag- red mud based geopolymer mortar: Simplex-centroid experimental design method

Performance Characteristics of Micro Fiber-Reinforced Ambient Cured One-Part Geopolymer Mortar for Repairing

Optimization of Reaction Conditions for Polyurethane Foam Synthesis with Liquefied Corn Stalk by Response Surface Methodology

Optimization design and mechanical properties of multi-component ecological gelling materials

A comparative study of porous geopolymers synthesized by pre-foaming and H2O2 foaming methods: Strength and pore structure characteristics

Multi-objective optimization of properties on polymer fiber-reinforced desulfurization gypsum-based composite cementitious materials

Research on mix design and mechanical performances of MK-GGBFS based geopolymer pastes using central composite design method

Unveiling the critical role of rheology modifiers in additive manufacturing of geopolymers and their mechanical properties

Influence of direct foaming methods on the early performance and microstructure of metakaolin‐based foam geopolymers

Crystallization Behavior and Mechanical Properties of High Open Porosity Dolomite Hollow Microspheres Filled Hybrid Geopolymer Foams

Mix proportion optimization and early strength development in modified foam concrete: an experimental study

Effects of Sand/Fly Ash and the Water/Solid Ratio on the Mechanical Properties of Engineered Geopolymer Composite and Mix Design Optimization

Study the Mechanical Properties of Geopolymer under Different Curing Conditions

Fabrication and properties of slag-based geopolymer syntactic foams containing hollow glass microspheres

Mechanochemical fabrication of geopolymer composites based on the reinforcement effect of microfibrillated cellulose

Effect of Organic Polymers on Mechanical Property and Toughening Mechanism of Slag Geopolymer Matrix