Abstract:<p>Engineered cementitious composites (ECC) are widely used owing to their high tensile capacity and strain-hardening behavior; however, the use of large quantities of cement require huge amount of resources and pollutes the environment. Fly ash-based geopolymer has been considered as a promising alternative for the development of high-ductility eco-friendly engineered materials. To improve the tensile capacity of engineered geopolymer composites (EGC), an ultra-high-ductility engineered geopolymer composite has been developed with the incorporation of functionalized multi-walled carbon nanotubes and polyvinyl alcohol fiber. This paper reports the mixture process and mechanical tests on EGC with different mixtures. Fourier transform infrared spectroscopy (FT-IR) and X-ray powder diffraction were used to investigate the characteristics of the reaction products in the geopolymer matrix. The microscopic morphology of the geopolymer matrix were characterized using field emission scanning electron microscopy. The excellent saturated multiple cracking properties and strain hardening of the ultra-high EGC (UHEGCs) were demonstrated by uniaxial tension testing. At the maximum limit, the residual crack width and crack spacing of UHEGCs were generally less than 70 μm and 2 mm, respectively. Tensile strain-hardening behavior with an ultimate tensile strain greater than 8% was experimentally demonstrated for the UHEGC. Meanwhile, the compressive strength of the UHEGC was greater than 45 MPa. The pseudo-strain hardening (PSH) indexes of UHEGC were used to determine the tensile capacity formation. Analysis demonstrated that the tensile capacity of UHEGC can be quantified using the classic PSH criterion, whereas ultra-high crack-bridging capacity was attributed to the ultra-high-ductility of UHEGC. The XRD studies demonstrated that for the reaction products of the geopolymer matrix, new crystalline phases are insignificant. The FT-IR analyses revealed that the amorphous aluminosilicate phases were mainly reaction products, i.e., N-A-S-H. Most importantly, the multi-scale (micro- and meso-scale) modification mechanisms of the material through the addition of two fibers were revealed.</p>

Mechanochemical fabrication of geopolymer composites based on the reinforcement effect of microfibrillated cellulose

Effect of Polymer-Grafted Carbon Nanofibers and Nanotubes on the Interlaminar Shear Strength and Flexural Strength of Carbon Fiber/epoxy Multiscale Composites

Performance Characteristics of Micro Fiber-Reinforced Ambient Cured One-Part Geopolymer Mortar for Repairing

Synthesis and Characterization of Red Mud and Rice Husk Ash-Based Geopolymer Composites

Mechanical performance and hydration mechanism of geopolymer composite reinforced by resin

Experimental Study on the Flexural Fatigue Performance of Slag/fly Ash Geopolymer Concrete Reinforced with Modified Basalt and PVA Hybrid Fibers

Hybrid Effect of PVA Fibre and Carbon Nanotube on the Mechanical Properties and Microstructure of Geopolymers

Investigation on Physical Behavior, Impermeability and Micromechanism of Engineering Geopolymer Composites Modified with MWCNTs

Synthesis and Performance Evaluation of Nano-Calcium Carbonate-Modified Geopolymers Incorporating Fly Ash and Manganese Slag: A Comprehensive Investigative Study

Reaction kinetics, mechanical properties, and microstructure of nano-modified recycled concrete fine powder/slag based geopolymers

Mechanical and Microstructural Properties of Polypropylene Fiber-Reinforced Geopolymer Composites

Study on the Reinforced Properties of Geopolymer Fibers with a Sustainable Development Role

Effect of Single and Synergistic Reinforcement of PVA Fiber and Nano-SiO2 on Workability and Compressive Strength of Geopolymer Composites

Matrix Wettability and Mechanical Properties of Geopolymer Cement-Polydimethylsiloxane (PDMS) Hybrids

Metakaolin-based geopolymer composites modified by epoxy resin and silane: Mechanical properties and organic-inorganic interaction mechanism

Mechanical and microstructural characterization of geopolymers synthesized from FCC waste catalyst and silica fume

Properties of modified engineered geopolymer composites incorporating multi-walled carbon Nanotubes(MWCNTs) and granulated blast furnace Slag(GBFS)

Properties of Fiber-Reinforced Geopolymer Mortar Using Coal Gangue and Aeolian Sand

Mechanical Properties and Microstructure of Highly Flowable Geopolymer Composites with Low-Content Polyvinyl Alcohol Fiber

The Influence of the Material Structure on the Mechanical Properties of Geopolymer Composites Reinforced with Short Fibers Obtained with Additive Technologies

Experiment and molecular dynamics simulation of functionalized cellulose nanocrystals as reinforcement in cement composites