Abstract:The large thermal gradient and high cooling rate generated in the fabrication of complex thin-walled components by laser powder bed fusion (LPBF) may cause uncontrolled deformation and reduce dimensional accuracy. The existing preheating-assisted LPBF process is still difficult to fabricate complex thin-walled components to large size (e.g., reach 800 mm) with the required dimensional accuracy and structural properties. To solve this problem, a novel integrated process of LPBF and hot metal gas forming (HMGF) was proposed in this study to fabricate complex thin-walled components. In this process, a preform with a geometrical shape close to the final component is first fabricated by LPBF process, and then this preform is formed into the desired shape by HMGF process. The hot formability of the LPBF AlSi10Mg sheets was investigated to verify the feasibility of this novel forming process. Also, the hot formability was compared with that of gravity cast (GC) AlSi10Mg sheets. The microstructure, phase structure, uniaxial and biaxial hot formability were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), hot uniaxial tensile and hot biaxial gas bulging experiments, respectively. The results indicated that the cellular microstructure of the LPBF AlSi10Mg gradually disappears with the increase in temperature. The LPBF AlSi10Mg sheet exhibits superior mechanical properties to the GC AlSi10Mg sheet due to the mixed strengthening mechanism among strengthening phase precipitation, grain structure and dynamic recrystallization (DRX) degree. For instance, the former demonstrates a total elongation (obtained from hot uniaxial tensile tests) of 81.2% and an ultimate bulging height (obtained from the hot biaxial gas bulging tests) of 12.16 mm; in contrast, the latter's elongation and bulging height are 56.2% and 9.26 mm, respectively. Moreover, the LPBF AlSi10Mg sheet shows more uniform deformation than the GC AlSi10Mg sheet during the bulging tests. The feasibility of forming the LPBF-fabricated preform by HMGF process was confirmed. This lays a foundation for the integrated process of LPBF and HMGF to fabricate complex thin-walled components.

The mechanics of the friction-assisted lateral extrusion process

Friction Extrusion: Solid-State Metal Synthesis and Recycling in Sustainable Manufacturing

Numerical simulation of friction extrusion: process characteristics and material deformation due to friction

Comprehensive Understanding of the Mechanical Properties and Microstructure Evolution of Aluminum Alloy/steel Laminates During Friction Stir-Assisted Incremental Forming with Synchronous Bonding Process

Processing of Highly Filled Polymer–Metal Feedstocks for Fused Filament Fabrication and the Production of Metallic Implants

Thermo-mechanical finite element analysis of the solid-state metal deposition via lateral friction surfacing

Deep drawing of fiber metal laminates using an innovative material design and manufacturing process

Light Metal Modification and Composite Preparation by a New Solid-State Processing Process: Rotational Friction Extrusion

An Integrated Computation Framework for Predicting Mechanical Performance of Single-Phase Alloys Manufactured Using Laser Powder Bed Fusion: A Case Study of CoCrFeMnNi High-Entropy Alloy

Microstructural analysis of AA8079 alloy sheets formed by friction stir incremental forming

A Novel Two-Stage Friction Stir-Assisted Incremental Sheet Forming Method for Uniform Microstructure and Enhanced Properties in Aluminum Alloys

Finite strain anisotropic elasto-plastic model for the simulation of the forming and testing of metal/short fiber reinforced polymer clinch joints at room temperature

Solid-State Additive Manufacturing of AA6060 Employing Friction Screw Extrusion Additive Manufacturing

Friction Stir Lap Welding of Light Alloys

Anisotropy and mechanical properties of dissimilar Al additive manufactured structures generated by multi-layer friction surfacing

Approach to Estimate the Phase Formation and the Mechanical Properties of Alloys Processed by Laser Powder Bed Fusion via Casting

Formability and microstructure of laser powder bed fused AlSi10Mg alloy sheets under various deformation conditions

Cold formability of friction stir processed 5754-H111 and 6082-T6 aluminum alloys: an experimental and numerical study

Microstructure and Mechanical Properties of Laminated Ferrous Medium-Entropy Alloys Fabricated by Direct Energy Deposition and Post-Rolling Annealing Treatment

The Control of Flow Localization in the Post Severe Plastic Deformation (SPD) Forming of Aluminum Through the Application of Low Strain Amplitude Multidirectional (LSA-MDF) Forging

Interlayer Friction Mechanism and Scale Effects in Ultra-Thin TA1 Titanium Alloy/Carbon Fiber-Reinforced Plastic Laminates