Abstract:Four solid wastes including sludge, watermelon rind, corncob, and eucalyptus and their demineralized samples were selected to conduct pyrolysis experiments under different experimental conditions, including temperature, residence time, carrier gas flow rate, and heating rate, respectively. The co‐pyrolysis experiment was carried out after mixing different types and different ratios of solid wastes to investigate the influence of different factors on yield of char, tar, and gas. A three‐layer artificial neural network (ANN) based on back propagation (BP) algorithm was developed and trained to simulate and predict the yield of products. The experimental conditions and characteristic parameters of samples, including the content of C, H, K, Ca, Mg, Fe, volatile, ash, and fixed carbon, were selected as input parameters while the yields of char, tar, and gas were selected as output parameters. The effect of input parameters including residence time, carrier gas flow rate, heating rate, and the content of metal elements on the network performance was investigated in detail to optimize the ANN model. It was found that the metal element has the greatest influence, and its importance to the yield of each product exceeds 25%. The pyrolysis experimental data of single‐component solid waste were selected as the model training set for model learning and training and then use the trained model to predict the co‐pyrolysis experimental data of multi‐component solid waste. Good agreement was achieved between experimental and predicted results; the correlation coefficient was 0.9836, and the root mean square error (RMSE) was only 2.4273, which revealed that the ANN method can be effectively used in predicting of the gas‐liquid‐solid product distribution after solid waste pyrolysis process.Novelty StatementIn this manuscript, based on the principle of artificial neural network, experimental conditions and sample characteristic parameters are used as input variables to model the distribution of different sample pyrolysis products. The model is used to predict the co‐pyrolysis data, and the influences of input parameters on the accuracy of the model are analyzed. The model values are in good agreement with the experimental data, indicating that the model is a high accurate general model and can be applied to different samples.

Modeling the prediction of hydrogen production by co‐gasification of plastic and rubber wastes using machine learning algorithms

Elucidating the effect of process parameters on the production of hydrogen-rich syngas by biomass and coal Co-gasification techniques: A multi-criteria modeling approach

Predictive modeling of membrane reactor efficiency using advanced artificial neural networks for green hydrogen production

Predicting hydrogen production from co-gasification of biomass and plastics using tree based machine learning algorithms

Multiscale Modeling of Plastic Pyrolysis with a Neural Network-Inspired Pyrolysis Kinetic Model and Coarse-Grained DEM-CFD

Applied machine learning for prediction of waste plastic pyrolysis towards valuable fuel and chemicals production

Performance analysis of waste biomass gasification and renewable hydrogen production by neural network algorithm

Predictive modeling of biomass gasification with machine learning-based regression methods

Artificial Neural Network Modeling in the Presence of Uncertainty for Predicting Hydrogenation Degree in Continuous Nitrile Butadiene Rubber Processing

Organic catalysts for hydrogen production from noodle wastewater: Machine learning and deep learning-based analysis

Artificial neural network based modelling approach for municipal solid waste gasification in a fluidized bed reactor

Integrated process for simulation of gasification and chemical looping hydrogen production using Artificial Neural Network and machine learning validation

Modeling of Artificial Neural Networks for Hydrogen Production via Water Electrolysis

Interpretable machine learning for predicting and evaluating hydrogen production via supercritical water gasification of biomass

Hydrogen production from plastic waste: A comprehensive simulation and machine learning study

Producer Gas Composition Prediction using Artificial Neural Network Algorithm

Hydrogen production optimization from sewage sludge supercritical gasification process using machine learning methods integrated with genetic algorithm

Modelling hydrogen production from biomass pyrolysis for energy systems using machine learning techniques

Prediction of gas‐liquid‐solid product distribution after solid waste pyrolysis process based on artificial neural network model

Modeling of necking area reduction of carbon steel in hydrogen environment using machine learning approach

Prediction of biogas production from food waste in a continuous stirred microbial electrolysis cell (CSMEC) with backpropagation artificial neural network