Abstract:This paper presents the preparation and thermal/physical characterization of phase change materials (PCMs) based on poly(ethylene glycol) 400 g·mol−1 and nano-enhanced by either carbon black (CB), a raw graphite/diamond nanomixture (G/D-r), a purified graphite/diamond nanomixture (G/D-p) or nano-Diamond nanopowders with purity grades of 87% or 97% (nD87 and nD97, respectively). Differential scanning calorimetry and oscillatory rheology experiments were used to provide an insight into the thermal and mechanical changes taking place during solid-liquid phase transitions of the carbon-based suspensions. PEG400-based samples loaded with 1.0 wt.% of raw graphite/diamond nanomixture (G/D-r) exhibited the lowest sub-cooling effect (with a reduction of ~2 K regarding neat PEG400). The influences that the type of carbon-based nanoadditive and nanoparticle loading (0.50 and 1.0 wt.%) have on dynamic viscosity, thermal conductivity, density and surface tension were also investigated in the temperature range from 288 to 318 K. Non-linear rheological experiments showed that all dispersions exhibited a non-Newtonian pseudo-plastic behavior, which was more noticeable in the case of carbon black nanofluids at low shear rates. The highest enhancements in thermal conductivity were observed for graphite/diamond nanomixtures (3.3–3.6%), while nano-diamond suspensions showed the largest modifications in density (0.64–0.66%). Reductions in surface tension were measured for the two nano-diamond nanopowders (nD87 and nD97), while slight increases (within experimental uncertainties) were observed for dispersions prepared using the other three carbon-based nanopowders. Finally, a good agreement was observed between the experimental surface tension measurements performed using a Du Noüy ring tensiometer and a drop-shape analyzer.

Preparation and Characterization of Poly(lactic acid)-Based Poly(ethylene glycol) and Daphne Essential Oil-Loaded Smart Nanofibers for Thermal Protection

Nanostructured Poly(l-Lactic Acid)-Poly(ethylene Glycol)-Poly(l-lactic Acid) Triblock Copolymers and Their CO2/O-2 Permselectivity

Preparation and characterization of polyethylene glycol/poly(L-lactic acid) blends

Morphology, thermal and mechanical properties of electrospun polyvinylidene/polyethylene glycol composite nanofibers as form-stabilized phase change materials

Physico-Chemical and Biological Evaluation of PLCL/SF Nanofibers Loaded with Oregano Essential Oil

Electrospun Polyethylene Glycol/Polyvinyl Alcohol Composite Nanofibrous Membranes as Shape-Stabilized Solid–Solid Phase Change Materials

Preparation And Characterization Of Flexible Smart Glycol/Polyvinylpyrrolidone/Nano-Al2o3 Phase Change Fibers

Preparation and Performance of Novel Polyvinylpyrrolidone/polyethylene Glycol Phase Change Materials Composite Fibers by Centrifugal Spinning

Preparation of oil-in-water core-sheath nanofibers through emulsion electrospinning for phase change temperature regulation

Preparation and Characterization of Bio-Based PLA/PEG/g-C3N4 Low-Temperature Composite Phase Change Energy Storage Materials

Investigating the Effect of Crystallizability and Glass Transition Temperature of Supporting Materials for Preparing High Enthalpy Electrospun Poly(Lactic Acid)/Poly(Ethylene Glycol) Phase Change Fibers

Preparation, characterization and thermal properties of nanocapsules containing phase change material n-dodecanol by miniemulsion polymerization with polymerizable emulsifier

The Preparation and Characterization of Ultrafine Fatty Acid Ester/Poly( meta -phenylene isophthalamide) Phase Change Fibers Designed for Thermo-regulating Protective Clothing

Flexible Polyethylene Glycol/polyvinylpyrrolidone Composite Phase Change Fibres: Preparation, Characterization, and Thermal Conductivity Enhancement

Preparation and Characterization of the Properties of Polyethylene Glycol @ Si 3 N 4 Nanowires As Phase-Change Materials

Preparation and Characterization of Cross-Linking PEG/MDI/PE Copolymer As Solid–solid Phase Change Heat Storage Material

Preparation and characterization of polyethylene glycol‐based form‐stable phase change materials supported by poly (vinyl formal) foams

Thermal and Physical Characterization of PEG Phase Change Materials Enhanced by Carbon-Based Nanoparticles

Morphology and Thermal Properties of Electrospun Fatty Acids/polyethylene Terephthalate Composite Fibers As Novel Form-Stable Phase Change Materials

Effect of Antibacterial Plant Extracts on the Morphology of Electrospun Poly(Lactic Acid) Fibres

Preparation and characterizations of HDPE–EVA alloy/OMT nanocomposites/paraffin compounds as a shape stabilized phase change thermal energy storage material