Abstract:With the rapid fusion of temperature sensing technology and microwave technology, microwave temperature sensors have become the protagonist of competing research. We propose a planar resonator temperature sensor that combines substrate material modifications with sensor structure design. To realize this concept, high-performance TiO2-xwt. % ZnO (0 ≤ x ≤ 3) microwave dielectric ceramics are prepared. The various factors influencing dielectric properties, including crystal structure, phase composition, Raman vibration, microstructure, element valence, and oxygen vacancy, are completely investigated. The TiO2-0.7 wt. % ZnO ceramic exhibiting exceptional properties (εr = 106.6, Qf = 46 000 GHz, τf = 426.0 ppm/°C) is selected for substrate fabrication. The frequency and temperature dependence of εr and tan δ are analyzed at 2–4.5 GHz from −50 to 100 °C, revealing a good linearity between εr and temperature. A CSRR temperature sensor employing this substrate material is designed, simulated, fabricated, and validated from −50 to 90 °C. This sensor generates two resonance frequencies (around 0.5 and 1.4 GHz) in the UHF band, demonstrating sensitivities of 2.2 MHz/10 °C and 6.3 MHz/10 °C at the first and second resonance frequencies, along with an outstanding normalized sensitivity of approximately 0.045. Through a comprehensive analysis of the physical mechanisms affecting the sensor's sensitivity and quality factor, the design of the sensor is strengthened from the perspective of optimizing the performance of microwave dielectric ceramics. The regulation mechanism of dielectric characteristics is enriched and clarified, thereby achieving a synergistic improvement in sensor performance. This work expands the application scope of microwave dielectric ceramics and provides an innovative approach to environmental monitoring.

MXene V 2 C-coated runway-type microfiber knot resonator for an all-optical temperature sensor

Ultracompact MXene V2C-Improved Temperature Sensor by a Runway-Type Microfiber Knot Resonator

A Temperature Sensor Based on Optical Microfiber Knot Resonator

Highly Sensitive Photothermal Fiber Sensor Based on MXene Device and Vernier Effect

High Sensitivity Temperature Sensor Based on Singlemode-No-core-singlemode Fibre Structure and Alcohol

Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

Temperature-insensitive Waveguide Sensor Using a Ring Cascaded with a Mach-Zehnder Interferometer

Development of a high-sensitivity and fast-response fiber temperature sensor utilizing Ti_3C_2T_X MXene/PDMS composites and Vernier effect

Enhanced temperature sensing by multi-mode coupling in an on-chip microcavity system

Temperature Sensing Characteristics of an MKR in a Microfiber Taper Based on Mechanisms of Interference and Resonance with Vernier Effect

Two-core photonic crystal fiber with selective liquid infiltration in the central air hole for temperature sensing

An Ultrasensitive Temperature Sensor in 1550 nm Communication Band Based on MoO2 Coated Microstructured Optical Fiber

Silicon waveguide-based single cavity Fano resonance temperature sensor

An UHF band planar resonator temperature sensor constructed from high-performance titanium dioxide system microwave dielectric ceramics: Toward integrated ceramic-based sensor devices

A Temperature Sensor Based on Composite Optical Waveguide

Optical Multi-ring Cascade Cavity Temperature Sensor with Ultra-High Sensitivity

High-sensitivity Temperature Sensing by Employing an On-Chip High-Q PDMS-coated Toroidal Microcavity

High-performance fiber sensor via Mach-Zehnder interferometer based on immersing exposed-core microstructure fiber in oriented liquid crystals

Micro-Tapered Fiber Few-Mode Interferometers Incorporated by Molecule Self-Assembly Fiber Grating for Temperature Sensing Applications

Ultrasensitive RI and temperature sensor based on cascaded microfiber MZIs with Vernier effect

An Antiinterference Temperature Sensor Based on Mach-Zehnder Interferometer Using Kagome Hollow-Core Photonic Crystal Fiber