Multiphysics monitoring of cementation operation: implications for wellbore integrity and hydrogeological characterization
Nima Gholizadeh Doonechaly,Andreas Reinicke,Marian Hertrich,Katrin Plenkers,Anne Obermann,Frank Fischli,Hansruedi Maurer,Stefan Wiemer,Domenico Giardini
DOI: https://doi.org/10.1007/s12665-024-11451-2
IF: 2.8
2024-02-29
Environmental Earth Sciences
Abstract:The application of optical fibers for assessing cemented wellbore's integrity attracted considerable attention recently, because of low cost, decent temporal/spatial resolution and absence of downhole electronics. This study presents an integrated approach to compare measurements from distributed temperature sensing (DTS), distributed strain sensing (DSS) and fiber Bragg grating (FBG), at different stages of the wellbore cementation at Bedretto Underground Laboratory for Geosciences and Geoenergies. Before the cementation, the measurements from DTS provided information about the hydrogeological settings of the wellbore, including the major flow zones, and presence of a highly conductive hydraulic shortcut to a nearby wellbore. During the cement injection, the temperature sensors (DTS and temperature FBG) clearly detected the evolution of the top of the cement. While the mechanical deformation sensors (DSS and strain FBG) did not provide significant insights during this stage, their role became more pronounced in subsequent phases. Results show that the irregularities on the wall have minor influence on the thermo-mechanical response of the wellbore, both during and after cementation. After cementation, the temperature sensors (DTS and temperature FBG) traced different phases of cement-hardening process, while DSS measurements identified areas of major deformation, primarily in fracture/fault zones. It was also observed that localized elevation of temperature and extensional deformation along the wellbore during the cement-hardening are correlated with the presence of permeable structures, most likely due to continuous supply of water. Results of this study show that monitoring of the cemented wellbores using optical fibers, in particular during cement hardening, not only can be used to efficiently assess the wellbore integrity but also can provide us additional important information about the hydrogeological settings of the target reservoir volume.
environmental sciences,water resources,geosciences, multidisciplinary