Abstract:Using single metal salts of zirconium, lanthanum, and iron as raw materials and sodium alginate as a cross-linking agent, a new composite adsorbent was prepared via the co-precipitation method and embedding immobilization technology, and its phosphorus adsorption performance in wastewater was evaluated. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used for characterization, and a 0.5 mol·L−1 sodium hydroxide solution was used to regenerate the adsorbent. The experimental results demonstrated that the adsorption rate reached 99.88% when the wastewater volume was 50 mL, the initial concentration of phosphorus-containing wastewater was 5 mg·L−1, the pH was 5, the dosage of composite adsorbent was 0.2 g, and the adsorption time was 200 min. The prepared adsorbent could reduce the initial phosphorus concentration of 5 mg·L−1 to 0.006 mg·L−1 in simulated wastewater, and from 4.17 mg·L−1 in urban sewage to undetected (<0.01 mg·L−1), thus meeting the discharge requirements of the grade A standard of the Urban Sewage Treatment Plant Pollutant Discharge Standard (GB18918-2002). The adsorption process conformed to the Freundlich adsorption isothermal equation and quasi-second-order kinetic equation, and the adsorption reaction was exothermic and spontaneous. More importantly, after three lye regeneration tests, the removal rate of phosphorus in water remained above 68%, that is, the composite adsorbent could be reproducibly fabricated and recycled. The characterization results showed that the surface of the composite adsorbent was rough, with a complex pore structure. After phosphorus removal, the surface morphology of the composite adsorbent showed a similar honeycomb structure, with a P-H, P-O stretching vibration peak and a characteristic P2p peak. At the same time, the proportion of hydroxyl groups (M-OH) on the metal surface decreased after adsorption. Our findings thus demonstrate that the mechanism of phosphorus removal is mainly based on the coordination exchange reaction between phosphate and metal active sites and surface hydroxyl groups, resulting in the formation of granular phosphate deposits.

Preparation and practical applications of a phosphate capture material with FeO(OH)-loaded polyurethane

Multipurpose Polysaccharide-based composite hydrogel with magnetic and thermoresponsive properties for phosphorus and enhanced copper (II) removal

Preparation of FeOOH Supported by Melamine Sponge and Its Application for Efficient Phosphate Removal

ZnO/PUF composites with a large capacity for phosphate adsorption: adsorption behavior and mechanism studies

Multifunctional Fe3O4/TiO2/NH2-UiO-66 with integrated interfacial features for favorable phosphate adsorption

Enhanced phosphate pollutant removal from liquid via adsorption flotation strategy: Synergic effect of Fe(III)-fulvic acid carrier and CTAB

Performance and adsorption mechanism of a magnetic calcium silicate hydrate composite for phosphate removal and recovery

Fabrication of a Reusable Polymer-Based Cerium Hydroxide Nanocomposite with High Stability for Preferable Phosphate Removal

Effective Purification of Phosphate from Water Using Ultra-Small Hydrated Cerium Oxides Encapsulated Inside Gel-Type Polymer

Synthesis of a Fe/Ca-based phosphate material and its application for adsorption of uranium ions from aqueous solution

Rapid adsorption of phosphorus at low concentration from water using a novel green organometallic material EGCG-Fe

Preparation and Phosphorus Removal Performance of Zr–La–Fe Ternary Composite Adsorbent Embedded with Sodium Alginate

Controllable Preparation of Superparamagnetic Fe3O4@La(OH)3 Inorganic Polymer for Rapid Adsorption and Separation of Phosphate

Enhanced low-concentration phosphate adsorption using magnetic UiO-66@Fe3O4 composite with potential linker exchange

Achieving win-win outcomes with cerium-loaded porous aluminum sludge hydrogel microspheres for enhanced phosphate removal

MgO coated magnetic Fe3O4@SiO2 nanoparticles with fast and efficient phosphorus removal performance and excellent pH stability

The adsorbent preparation of lanthanum functionalized sponge based on CMC coating for effective phosphorous removal

Achieving win-win outcomes with cerium-loaded porous aluminum sludge hydrogel microspheres for enhanced phosphate removal.

Synthesis of Fe3O4@Phoslock® composites and the application in adsorption of phosphate from aqueous solution

Highly Effective Wastewater Phosphorus Removal by Phosphorus Accumulating Organism Combined with Magnetic Sorbent MFC@La(OH)3

Equilibrium and Kinetics Studies of Phosphate Removal from Solution Onto a Hydrothermally Modified Al-Si-Fe-Ca Composite Adsorbent