Abstract:Using single metal salts of zirconium, lanthanum, and iron as raw materials and sodium alginate as a cross-linking agent, a new composite adsorbent was prepared via the co-precipitation method and embedding immobilization technology, and its phosphorus adsorption performance in wastewater was evaluated. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used for characterization, and a 0.5 mol·L−1 sodium hydroxide solution was used to regenerate the adsorbent. The experimental results demonstrated that the adsorption rate reached 99.88% when the wastewater volume was 50 mL, the initial concentration of phosphorus-containing wastewater was 5 mg·L−1, the pH was 5, the dosage of composite adsorbent was 0.2 g, and the adsorption time was 200 min. The prepared adsorbent could reduce the initial phosphorus concentration of 5 mg·L−1 to 0.006 mg·L−1 in simulated wastewater, and from 4.17 mg·L−1 in urban sewage to undetected (<0.01 mg·L−1), thus meeting the discharge requirements of the grade A standard of the Urban Sewage Treatment Plant Pollutant Discharge Standard (GB18918-2002). The adsorption process conformed to the Freundlich adsorption isothermal equation and quasi-second-order kinetic equation, and the adsorption reaction was exothermic and spontaneous. More importantly, after three lye regeneration tests, the removal rate of phosphorus in water remained above 68%, that is, the composite adsorbent could be reproducibly fabricated and recycled. The characterization results showed that the surface of the composite adsorbent was rough, with a complex pore structure. After phosphorus removal, the surface morphology of the composite adsorbent showed a similar honeycomb structure, with a P-H, P-O stretching vibration peak and a characteristic P2p peak. At the same time, the proportion of hydroxyl groups (M-OH) on the metal surface decreased after adsorption. Our findings thus demonstrate that the mechanism of phosphorus removal is mainly based on the coordination exchange reaction between phosphate and metal active sites and surface hydroxyl groups, resulting in the formation of granular phosphate deposits.

Achieving win-win outcomes with cerium-loaded porous aluminum sludge hydrogel microspheres for enhanced phosphate removal.

Achieving win-win outcomes with cerium-loaded porous aluminum sludge hydrogel microspheres for enhanced phosphate removal

Synthesis of Al-Modified Hydrochar from Corn Stover for Efficient Phosphate Removal

Enhanced phosphate adsorption studies on several metal-modified aluminum sludge: preparation optimization, adsorption behavior, and mechanistic insight

Efficient Phosphate Recovery and Treatment of High-Phosphorus Wastewater Using Sodium Alginate-Immobilized Microspheres Based on Aluminum-Rich Water Treatment Plant Sludge

Construction of 3D network aluminum sludge-based hydrogel beads: combination of macroization, amino functionalization, and resource utilization

Performance and mechanism of phosphorus adsorption removal from wastewater by a Ce-Zr-Al composite adsorbent

Magnetic Aminated Lignin/Ceo2/Fe3o4 Composites With Tailored Interfacial Chemistry And Affinity For Selective Phosphate Removal

Cerium-based Sorbent with 100% Ce(III) and High Dispersion for Enhanced Phosphate Removal from Wastewater

Efficient adsorption of phosphorus by macroscopic MOF/chitosan composites and preliminary investigation of subsequent phosphorus recovery through electrochemically-driven struvite precipitation

Fabrication of a Reusable Polymer-Based Cerium Hydroxide Nanocomposite with High Stability for Preferable Phosphate Removal

The Synthesis and Characterization of Hydrous Cerium Oxide Nanoparticles Loaded on Porous Silica Micro-Sphere As Novel and Efficient Adsorbents to Remove Phosphate Radicals from Water

Iron-loaded magnetic alginate-chitosan double-gel interpenetrated porous beads for phosphate removal from water: Preparation, adsorption behavior and pH stability

The modification of biomass waste by cerium-based MOFs for efficient phosphate removal: excellent performance and reaction mechanism

Preparation and Phosphorus Removal Performance of Zr–La–Fe Ternary Composite Adsorbent Embedded with Sodium Alginate

Enhanced phosphate removal by filler encapsulation and surface engineering using SA/PVA matrix: Fabrication optimization, adsorption behaviors and inner removal mechanism

Preparation of Mesoporous Aluminumsilicate Materials and Performance of Phosphate Adsorption

Enhanced phosphate removal from aqueous environments using three-dimensional La-doped carboxylic carbon nanotubes/alginate: Performance and mechanisms

Co-Utilization of Sewage Sludge and Rice Husk in Ceramsite Preparation with Selective Adsorption Capacity to Pb

Biochar-loaded Ce<SUP>3+</SUP>-enriched ultra-fine ceria nanoparticles for phosphate adsorption

Preferable Phosphate Sequestration Using Polymer-Supported Mg/Al Layered Double Hydroxide Nanosheets