Abstract:Due to the ever-increasing consumption of poly (ethylene terephthalate) (PET) for the industries of packaging and electronics, the waste non-degradable PET has brought serious ecological pollution. However, the current recovery rate of waste PET is still limited, and the mechanical and heat-resistant properties are too poor to meet the requirements of practical applications. The recycling of waste PET is of practical significance to material/energy saving and environmental protection, contributing to the sustainable development of economy and society. In this work, an innovative method was proposed to fabricate strong and heat-resistant materials by using waste PET bottle flakes via carbon dioxide (CO 2 ) treatment at ambient temperature. The results show that the crystallinity of the PET samples treated by CO 2 at 800 psi is increased by 30.6%, the tensile strength and Young's modulus are increased by 21.9% and 20.6%, respectively, compared with untreated samples. Moreover, the dynamic mechanical analysis indicates that the heat-resistant performance of CO 2 -treated samples is significantly improved, whose storage modulus increased 33.5% and glass transition temperature increased 17.7 °C. Furthermore, aiming to investigate how the CO 2 -treatment improved the mechanical performance of the waste PET, the sorption-desorption experiments were conducted to examine the sorption kinetics of CO 2 in the matrix, combined with the Avrami model employed to analyze the crystallization kinetics of PET under high-pressure CO 2 . It demonstrates that the enhancement of the tensile strength is ascribed to the transition of crystals from two-dimensional structures to three-dimensional structures with an increment in the CO 2 pressure.

Effect of Calcium Oxide on Stress Crack Resistance and Light Transmittance in PET Containers for Packaging Carbonated Beverages

Optimizing Physical Aging in Poly(ethylene Terephthalate)-Glycol (PETG)

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

The Influence of Environmental Stress Cracking (ESC) and Gamma Irradiation on the Mechanical Properties of Polycarbonate: Study of Synergistic Effects

Performance of Recycled Opaque PET Modified by Reactive Extrusion

Effect of calcium carbonate as pore-forming agent on properties of recycled polyethylene terephthalate masterbatch

Polycarbonate/Titania Composites Incorporating TiO2 with Different Nanoscale Morphologies for Enhanced Environmental Stress Cracking Resistance in Dioctyl Phthalate

Effect of rPET Content and Preform Heating/Cooling Conditions in the Stretch Blow Molding Process on Microcavitation and Solid-State Post-Condensation of vPET-rPET Blend: Part I—Research Methodology and Results

Effect of molding on the structure and properties of poly(butylene adipate-co-terephthalate)/poly(propylene carbonate)/organically modified montmorillonite nanocomposites

The Effect of Temperature on the Optical and Analytical Properties of PET Polymer Used in Drinking Water Bottles

Effects of Nanoparticle Treatment on the Crystallization Behavior and Mechanical Properties of Polypropylene/calcium Carbonate Nanocomposites

Effect of Light Intensity on Ultraviolet Irradiated Polypropylene and Its Compatibilization with CaCO3

The effect of calcite on the mechanical, morphological and thermal properties of virgin and recycled thermoplastic copolyester elastomer composites

Effect of Hydrolysis Stabilizers on Anti-Aging Performance of PET under Pressure Cooker Test

Non-isothermal Crystallization Kinetics and Rheological Behaviors of PBT/PET Blends: Effects of PET Property and Nano-Silica Content

Effect of Crystallization on Tensile Mechanical Properties of PET Foam: Experiment and Model Prediction

Effects of Quercetin and Organically Modified Montmorillonite on the Properties of Poly(butylene adipate-co-terephthalate)/Thermoplastic Starch Active Packaging Films

High-Performance Optical PET Analysis Via Non-Isothermal Crystallization Kinetics

Facile Sustainable Synthesis of Polyester-Polycarbonate and Effects of the Carbonate on Thermal, Mechanical, and Transparency Properties

The Effect of Titanium Dioxide Surface Modification on the Dispersion, Morphology, and Mechanical Properties of Recycled PP/PET/TiO2 PBNANOs

Mechanically strong and heat-resistant waste poly (ethylene terephthalate) derived by carbon dioxide treatment at ambient temperature