Abstract:Due to the ever-increasing consumption of poly (ethylene terephthalate) (PET) for the industries of packaging and electronics, the waste non-degradable PET has brought serious ecological pollution. However, the current recovery rate of waste PET is still limited, and the mechanical and heat-resistant properties are too poor to meet the requirements of practical applications. The recycling of waste PET is of practical significance to material/energy saving and environmental protection, contributing to the sustainable development of economy and society. In this work, an innovative method was proposed to fabricate strong and heat-resistant materials by using waste PET bottle flakes via carbon dioxide (CO 2 ) treatment at ambient temperature. The results show that the crystallinity of the PET samples treated by CO 2 at 800 psi is increased by 30.6%, the tensile strength and Young's modulus are increased by 21.9% and 20.6%, respectively, compared with untreated samples. Moreover, the dynamic mechanical analysis indicates that the heat-resistant performance of CO 2 -treated samples is significantly improved, whose storage modulus increased 33.5% and glass transition temperature increased 17.7 °C. Furthermore, aiming to investigate how the CO 2 -treatment improved the mechanical performance of the waste PET, the sorption-desorption experiments were conducted to examine the sorption kinetics of CO 2 in the matrix, combined with the Avrami model employed to analyze the crystallization kinetics of PET under high-pressure CO 2 . It demonstrates that the enhancement of the tensile strength is ascribed to the transition of crystals from two-dimensional structures to three-dimensional structures with an increment in the CO 2 pressure.

Effect of calcium carbonate as pore-forming agent on properties of recycled polyethylene terephthalate masterbatch

Influence of Selection of Extruders on the Processing of Recycled PET Flakes

Influence of Different Molecular Weights and Concentrations of Poly(glycidyl methacrylate) on Recycled Poly(ethylene terephthalate): A Thermal, Mechanical, and Rheological Study

[Enhancing PET Degradation Efficiency Through Fusing Carbohydrate-Binding Modules in LCC-ICCG].

A comprehensive study on recycled and virgin PET melt-spun fibers modified by PMDA chain extender

The Effects of Two-Step Reactive Processing on the Properties of Recycled Poly(ethylene Terephthalate)

Processing Poly (ethylene Terephthalate) Waste into Functional Carbon Materials by Mechanochemical Extrusion.

Modification of Poly(ethylene Terephthalate) by Combination of Reactive Extrusion and Followed Solid‐state Polycondensation for Melt Foaming

Thermal Properties and Morphology of Recycled Poly(ethylene Terephthalate)/maleic Anhydride Grafted Linear Low‐density Polyethylene Blends

Recycled Poly(Ethylene Terephthalate) from Waste Textiles with Improved Thermal and Rheological Properties by Chain Extension

The Influence of Calcium Carbonate on the Mechanical Properties and Phase Morphology of PA6/PP Blend

Low temperature solid-state extrusion of recycled poly(ethylene terephthalate) bottle scraps

Properties and Morphology of Recycled Poly(ethylene Terephthalate)/bisphenol a Polycarbonate/poly(styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene) Blends by Low‐temperature Solid‐state Extrusion

Effects of different types of polyethylene on the morphology and properties of recycled poly(ethylene terephthalate)/polyethylene compatibilized blends

Effect of rPET Content and Preform Heating/Cooling Conditions in the Stretch Blow Molding Process on Microcavitation and Solid-State Post-Condensation of vPET-rPET Blend: Part I—Research Methodology and Results

Reactive extrusion of recycled poly(ethylene terephthalate) with polycarbonate by addition of chain extender

Mechanically strong and heat-resistant waste poly (ethylene terephthalate) derived by carbon dioxide treatment at ambient temperature

Compatibility study of recycled Polypropylene (PP)/Poly(ethylene terephthalate) (PET) blends nanocomposites with PP‐g‐MAH: Modeling of twin screw extrusion

Achieving bottle‐grade poly(ethylene terephthalate)‐like properties from blends of bottle‐grade and thermoform‐grade poly(ethylene terephthalate)

Preparation of Branched and Crosslinked Poly(ethylene terephthalate)and Its Foaming Behavior

Recycling of Bottle Grade PET: Influence of HDPE Contamination on The Microstructure and Mechanical Performance of 3D Printed Parts