Abstract:This paper investigates the comparative design optimizations of a five-phase outer-rotor flux-switching permanent magnet (FSPM) machine for in-wheel traction applications. To improve the comprehensive performance of the motor, two kinds of large-scale design optimizations under different operating conditions are performed and compared, including the traditional optimization performed at the rated operating point and the optimization targeting the whole driving cycles. Three driving cycles are taken into account, namely, the urban dynamometer driving schedule (UDDS), the highway fuel economy driving schedule (HWFET), and the combined UDDS/HWFET, representing the city, highway, and combined city/highway driving, respectively. Meanwhile, the computationally efficient finite-element analysis (CE-FEA) method, the cyclic representative operating points extraction technique, as well as the response surface methodology (in order to minimize the number of experiments when establishing the inverse machine model), are presented to reduce the computational effort and cost. From the results and discussion, it will be found that the optimization results against different operating conditions exhibit distinct characteristics in terms of geometry, efficiency, and energy loss distributions. For the traditional optimization performed at the rated operating point, the optimal design tends to reduce copper losses but suffer from high core losses; for UDDS, the optimal design tends to minimize both copper losses and PM eddy-current losses in the low-speed region; for HWFET, the optimal design tends to minimize core losses in the high-speed region; for the combined UDDS/HWFET, the optimal design tends to balance/compromise the loss components in both the low-speed and high-speed regions. Furthermore, the advantages of the adopted optimization methodologies versus the traditional procedure are highlighted.

Surrogate-Assisted Optimization of a Five-Phase SPM Machine With Quasi-Trapezoidal PMs

Multi-Objective Optimization of Multistage Centrifugal Pump Based on Surrogate Model

Optimization Design of an Interior Permanent-Magnet Synchronous Machine for a Hybrid Hydraulic Excavator

Multi-Objective Optimal Design of High-Speed Surface-Mounted Permanent Magnet Synchronous Motor for Magnetically Levitated Flywheel Energy Storage System

A computationally efficient surrogate model based robust optimization for permanent magnet synchronous machines

Analytical Investigation and Heuristic Optimization of Surface Mounted Permanent Magnet Machines With Hybrid Magnetic Structure

Rotor Multidisciplinary Optimization of High Speed PMSM based on Multi-fidelity Surrogate Model and Gradient Sequential Sampling

Sequential Subspace Optimization Design of a Dual Three-Phase Permanent Magnet Synchronous Hub Motor Based on NSGA III

An Accurate Multi-objective Optimization Strategy for Surface-Mounted Permanent-Magnet Machines Based on Nonlinear Finite-Permeability Subdomain Model

Computationally Efficient Optimization of a Five-Phase Flux-Switching PM Machine under Different Operating Conditions.

A Multi-Objective Finite-Element Method Optimization That Reduces Computation Resources Through Subdomain Model Assistance, for Surface-Mounted Permanent-Magnet Machines Used in Motion Systems

Multi Objective Optimization of Permanent Magnet Synchronous Motor Based on Taguchi Method and PSO Algorithm

Cogging Torque Minimization of Surface-Mounted Permanent Magnet Synchronous Motor Based on RSM and NSGA-II

Optimization of a Consequent-Pole PMSM with a Sobol Sequence Based Multi-Objective Hybrid Optimization Algorithm

Kriging-Assisted Multiobjective Optimization of Embedded Magnetic Encoder in PM Synchronous Machines

Multiobjective Particle Swarm Optimization Design of Permanent Magnet Machine for Torque Density Improvement and Torque Ripple Suppression

Multiobjective Optimization of the PMSM With the Same Number of Poles and Slots Considering Dynamic Response and Torque Performance

Multi-Objective Optimization of Yokeless and Segmented Armature Machine for In-Wheel Traction Applications Based on the Taguchi Method

Multi-Physics and Multi-Objective Optimization of a High Speed PMSM for High Performance Applications

Research on Response Surface Modeling Method of Permanent Magnet Synchronous Motor Based on Sequential Experimental Design

Multi-Objective Optimization Design of the External Rotor Permanent Magnet-Assisted Synchronous Reluctance Motor Based on the Composite Algorithm