Enhanced Thermoelectric Properties of Bilayer-Like Structural Graphene Quantum Dots/Single-Walled Carbon Nanotubes Hybrids

Jun-An Yao,Xiao-Xi Peng,Zhe-Kun Liu,Yun-Fei Zhang,Ping Fu,Hui Li,Zhi-Dong Lin,Fei-Peng Du

DOI: https://doi.org/10.1021/acsami.0c10102

2020-08-06

Abstract:In order to improve the thermoelectric properties of single-walled carbon nanotubes (SWCNTs), bilayer-like structures of graphene quantum dots (GQDs) and SWCNTs films (b-GQDs/SWCNTs) were prepared by directly coating GQDs on the surface of SWCNTs films. Compared to pristine SWCNT films (p-SWCNTs), the electrical conductivity of b-GQDs/SWCNTs increased while their Seebeck coefficient decreased. The special interface structure of GQDs and SWCNTs can not only improve carrier transport to increase electrical conductivity but also scatter phonons to reduce thermal conductivity. A maximum power factor (PF) of 51.2 μW·m–1·K–2 is obtained at 298 K for the b-GQDs/SWCNTs (2:100), which is higher than the PF of 40.9 μW·m–1·K–2 by p-SWCNTs. Incorporation of GQDs shows an obvious improvement in power factor and a significant reduction in the thermal conductivity for SWCNTs, and thus, preparation of b-GQDs/SWCNTs provides a new strategy to enhance the thermoelectric properties of SWCNTs-based materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10102?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10102</a>.Dispersing behavior of GQDs, p-SWCNTs, and h-GQDs/SWCNTs; UPS analysis of SWCNTs; diagram of the Femi level and band gap; cross-sectional photograph of p-SWCNTs mats (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10102/suppl_file/am0c10102_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to improve the thermoelectric properties of single - walled carbon nanotube (SWCNTs) - based materials. Specifically, by directly coating graphene quantum dots (GQDs) on the surface of SWCNTs thin films to form a bilayer - structured GQDs/SWCNTs composite (b - GQDs/SWCNTs), its thermoelectric properties are improved. The study found that this bilayer structure can not only increase the electrical conductivity (\(\sigma\)) of the composite but also reduce its Seebeck coefficient (\(S\)), thereby effectively enhancing the power factor (PF). In addition, the introduction of GQDs significantly reduces the thermal conductivity (\(k\)) of the SWCNTs thin film, which helps to further improve the overall thermoelectric properties of the material. The paper mentioned that the b - GQDs/SWCNTs composite prepared in this way has a maximum power factor of 51.2 \(\mu\)W·m\(^{-1}\)·K\(^{-2}\) at 298 K, which is higher than 40.9 \(\mu\)W·m\(^{-1}\)·K\(^{-2}\) of the undoped SWCNTs thin film (p - SWCNTs). Therefore, this study provides a new strategy to enhance the thermoelectric properties of SWCNTs - based materials. In summary, the main objective of this paper is to explore and verify an effective method to improve the thermoelectric properties of SWCNTs - based materials by constructing a GQDs/SWCNTs bilayer structure.

Enhanced Thermoelectric Properties of Bilayer-Like Structural Graphene Quantum Dots/Single-Walled Carbon Nanotubes Hybrids

Enhancement of the Electrical Conductivity and Thermoelectric Performance of Single-Walled Carbon Nanotubes by the Introduction of Conjugated Small Molecules with Cation Groups

Preparation and Thermoelectric Properties of Semiconducting Single-Walled Carbon Nanotubes/Regioregular Poly(3-dodecylthiophene) Composite Films

Promoting the Thermoelectric Performance of Single-Walled Carbon Nanotubes by Inserting Discotic Liquid-Crystal Molecules

Effects of carbon nanomaterials hybridization of Poly(3,4-ethylenedioxythiophene): poly (styrene sulfonate) on thermoelectric performance

Synergistically Boosting Thermoelectric Performance of PEDOT:PSS/SWCNT Composites via the Ion-Exchange Effect and Promoting SWCNT Dispersion by the Ionic Liquid

Achieving high thermoelectric properties in PEDOT:PSS/SWCNTs composite films by a combination of dimethyl sulfoxide doping and NaBH4 dedoping

Enhanced Thermoelectric Performance of Bi2Te3 Through Uniform Dispersion of Single Wall Carbon Nanotubes

Enhanced thermoelectric properties of copper phthalocyanine/single-walled carbon nanotubes hybrids

Tuning thermoelectric performance with N-annulated perylene-based small molecules and single-walled carbon nanotube nanocomposite films

In Situ Surface Polymerization of PANI/SWCNT Bilayer Film: Effective Composite for Improving Seebeck Coefficient and Power Factor

Effect of Uniform Dispersion of Single-Wall Carbon Nanotubes on the Thermoelectric Properties of BiSbTe-Based Nanocomposites

Boosting thermoelectric performance of single-walled carbon nanotubes-based films through rational triple treatments

Enhancement of thermoelectric property of carbon nanotubes by p-type doping with judicious molecular design of spiro-bifluorene derivatives

SWCNTs/Ag2Se Film with Superior Bending Resistance and Enhanced Thermoelectric Performance Via in Situ Compositing

Monodispersed semiconducting SWNTs significantly enhanced the thermoelectric performance of regioregular poly(3-dodecylthiophene) films

Enhanced thermoelectric performance of poly(3-substituted thiophene)/single-walled carbon nanotube composites via polar side chain modification

SWCNTs/Ag 2 Se film with superior bending resistance and enhanced thermoelectric performance via in situ compositing

Understanding the Solvent Effects on Polarity Switching and Thermoelectric Properties Changing of Solution-Processable N-Type Single-Walled Carbon Nanotube Films

Graphene Quantum Dots Embedded in Bi2Te3 Nanosheets to Enhance Thermoelectric Performance

Flexible layer-structured Bi2Te3 thermoelectric on a carbon nanotube scaffold