Abstract:Purpose A computational fluid dynamics (CFD) analysis has been carried out on the aerodynamic and thermal behavior of an incompressible Newtonian fluid having a constant property and flowing turbulently through a two-dimensional horizontal high-performance heat transfer channel with a rectangular cross section. The top surface of the channel was kept at a constant temperature, while it was made sure to maintain the adiabatic condition of the bottom surface. Two obstacles, with different shapes, i.e. flat rectangular and V-shaped, were inserted into the channel; they were fixed to the top and bottom surfaces of the channel in a periodically staggered manner to force vortices to improve the mixing and consequently the heat transfer. The first fin-type obstacle is placed on the heated top channel surface, and the second baffle-type one is placed on the insulated bottom surface. Five different obstacle situations were considered in this study, which are referred as cases FF (flat fin and flat baffle), FVD (flat fin and V-downstream baffle), FVU (flat fin and V-upstream baffle), VVD (V-downstream fin and V-downstream baffle) and VVU (V-Upstream fin and V-upstream baffle). Design/methodology/approach The flow model is governed by Reynolds-averaged Navier–Stokes equations with the k-epsilon turbulence model and the energy equation. These governing equations are discretized by the finite volume method, in two dimensions, using the commercial CFD software FLUENT software with the Semi Implicit Method for Pressure Linked Equations (SIMPLE) algorithm for handling the pressure-velocity coupling. Air is the test fluid with the flow rate in terms of Reynolds numbers ranging from 12,000 to 32,000. Findings Important deformations and large recirculation regions were observed in the flow field. A vortex causes a rotary motion inside the flow field, which enhances the mixing by bringing the packets of fluid from the near-wall region of the channel to the bulk and the other way around. The largest value of the axial variations of the Nusselt number and skin friction coefficient is found in the region facing the baffle, while the smallest value is in the region near the fin, for all cases. The thermal enhancement factor (TEF) was also introduced and discussed to assess the performance of the channel for various obstacle situations. It is found that the TEF values are 1.273-1.368, 1.377-1.573, 1.444-1.833, 1.398-1.565 and 1.348-1.592 for FF, FVD, FVU, VVD and VVU respectively, depending on the Re values. In all cases, the TEF was found to be much larger than unity; its maximum value was around 1.833 for FVU at the highest Reynolds number. Therefore, the FVU may be considered as the best geometrical configuration when using the obstacles to improve the heat transfer efficiency inside the channel. Originality/value This study can be a real application in the field of shell-and-tube heat exchangers and flat plate solar air collectors.

Heat transfer improvement and drag force reduction around three heated square cylinders controlled by partitions

A computational study of drag reduction and vortex shedding suppression of flow past a square cylinder in presence of small control cylinders

Flow control around two side-by-side square cylinders using dual splitter plates

Role of a Hinged Single Separator in Heat Transfer Enhancement and Drag Reduction in Circular Cylinder Flow

Heat and drag reduction on the hypersonic nose with a nexus between active and passive control methods

Improvement of vortex shedding control and drag reduction on a square cylinder using twin plates

Multi Parameters Control Mechanism on Drag and Heat Reduction of Opposing Jet

Active control of circular cylinder flow by affiliated rotating cylinders

Numerical investigation of the heat transfer and flow pattern on tandem triangle-grooved cylinders

Numerical analysis and optimization of heat transfer enhancement on a flat plate by an EHD jet

Flow structure around and heat transfer from cylinders modified from square to circular

Numerical investigation and optimization of flat plate transpiration-film combined cooling structure

Numerical Method Of Lattice Boltzmann Simulation For Flow Past A Rotating Circular Cylinder With Heat Transfer

Impact of an isothermal arc-shaped control plate on flow and heat transfer around an isothermally heated rotating circular cylinder

Baffle orientation and geometry effects on turbulent heat transfer of a constant property incompressible fluid flow inside a rectangular channel

Numerical Investigations of Outer-Layer Turbulent Boundary Layer Control for Drag Reduction Through Micro Fluidic-Jet Actuators

Enhancing hydrodynamic forces through miniaturized control of square cylinders using the lattice Boltzmann method

Fluid–thermal–structure interaction of three heated circular cylinders in tandem at a low Reynolds number of 150

Enhancing hydrodynamic drag and lift reduction around two staggered obstacles via control plates

Heat transfer enhancement mechanism of elliptical cylinder for minichannels with delta winglet longitudinal vortex generators

Impact of a Cold Control Plate on Fluid Flow and Heat Transfer across an Isothermally Heated Rotary Oscillating Circular Cylinder