Abstract:This study was conducted to address water pollution concerns entwined with electroless nickel plating (ENP) industry. Its principal endeavor centers on the development and application of an innovative single-compartment technique to proficiently treat spent ENP baths. The research demonstrated the recovery of Nickel (Ni) from wastewater through synergistic interactions between electrocatalytic oxidation and electrodeposition processes. Electrochemical tests used a direct current power supply in constant current mode, with the positive pole on IrO 2 /Ti mesh and negative pole on stainless steel. Zero-valent nickel recovered on the electrodes was conclusively identified via SEM, XRD, and EDS analyses. This work carefully examined the impact of initial pH, initial Ni ion concentration, and current density (CD) on electrochemical recovery efficiency. The findings suggest that higher current densities positively influence the Ni recovery ratio. Additionally, through meticulous experiments, the viability of this approach for treating spent ENP baths has been confirmed. An impressive 98.88% recovery of Ni was achieved under specific conditions: CD 4.5 mA cm −2 , experimental time 180 min, pH 4.5, electrodes spacing 1.5 cm, temperature 55 °C, and a dilution factor 10 times. The study demonstrated the process for Ni recovering from ENP wastewater through direct oxidation and subsequent decomposition, leading to liberation of free Ni ions. The recovered substance, identified as zero-valent nickel, adheres to the electrodes. The method employed in this research is described by its cost-effectiveness, user-friendliness, and low energy consumption. As a result, this study makes valuable contributions to both wastewater remediation and the sustainable utilization of Ni resources.

Integrating electrodeposition with electrolysis for closed-loop resource utilization of battery industrial wastewater

Resourceful Treatment of Battery Recycling Wastewater Containing H2SO4 and NiSO4 by Diffusion Dialysis and Electrodialysis

Integration of Hydrogen Production and Waste Heat Recovery in Electrochemical Wastewater Treatment

Grave-to-cradle Upcycling of Ni from Electroplating Wastewater to Photothermal CO2 Catalysis

Electro-deposition experiment of electrolytic zinc rinsing wastewater

Emerging electrochemical processes for materials recovery from wastewater: Mechanisms and prospects

Synergistic recycling and conversion of spent Li-ion battery leachate into highly efficient oxygen evolution catalysts

Electrochemical technologies for wastewater treatment and resource reclamation

Biological upcycling of nickel and sulfate as electrocatalyst from electroplating wastewater

Upcycling Nickel Ions into Self-Supported Electrocatalyst by Using ZIF-8/Bacterial Cellulose Adsorbent

Engineering a concordant microenvironment with air-liquid-solid interface to promote electrochemical H2O2 generation and wastewater purification

Electrocatalysis coupled super-stable mineralization for the efficient treatment of phosphorus containing plating wastewater

A closed-loop electrokinetic system for recovery of PbO2@Fe composite derived from lead-containing sludge

Development of Electro-Chemical Technology and High Efficiency Catalytic Electrode for Wastewater Treatment

Electrolytic Separation and Reuse of Active Materials from Discarded Lithium-Ion Batteries

Electroplating waste water treatment method

Realizing Lean-Leachate Recycling of Spent Lithium Nickel Oxides by Dynamically Stabilizing the Hole-Mediated Diffusion Kinetics

Research Progress on Treatment and Recovery of Metals in Wastewater by Electrodeposition

Resource utilization of electroplating wastewater: obstacles and solutions

Highly efficient nickel recovery from industrial wastewater via synergistic electrodeposition and electrocatalytic oxidation technique

(Invited) Bioelectrochemical Systems for Resource Recovery and H<sub>2</sub> Production from Wastewater