Abstract:Zinc oxide, as a widely used material in optics, electronics, and medicine, requires a complete overview of different conditions for facile and easily reproducible syntheses. Two types of optimization of ZnO hydrothermal preparation from zinc acetate and sodium hydroxide solution are presented, which allowed for obtaining miscellaneous morphologies of materials. The first was a temperature-controlled synthesis from 100 to 200 °C, using citric acid as a capping agent. The formation of hexagonal rods at the lowest temperature was evidenced, which agglomerated to flower-like structures at 110 and 120 °C. It was followed by transformation to flake-like roses at 160 °C, up to disordered structures composed of nanosized plates (>180 °C). The transformations were generated through a temperature change, which had an impact on the diffusion effect of hydroxide and citrate complexes. The second optimization was the hydrothermal synthesis free of organic additives and it included only a pH variation from 7.5 to 13.5. It was found that by utilizing a slow-dropping process and varying amounts of NaOH solutions, it is possible to obtain well-formed hexagonal pellets at pH 8.0-8.5. Strongly basic conditions of pH 11.0 and 13.5 impeded superstructure formations, giving small elongated particles of ZnO. All samples were characterized by high phase purity and crystallinity, with a specific surface area of 18-37 m2/g, whereas particle size distribution indicated a predominance of small particles (<1 μm).

Hydrothermal synthesis of ZnO nanostructures with controllable morphology change

Morphology Investigation of Hydrothermally Prepared ZnO Micro-Crystals Influenced by Cu2+ Ions

Conversion of large-scale oriented ZnO rod array into nanotube array under hydrothermal etching condition via one-step synthesis approach

Microwave-Assisted Rapid Synthesis Of Zno Hexagonal Quasi-Hourglasses

Effect of Reaction Temperature on Surface Morphology and Photoelectric Properties of ZnO Grown by Hydrothermal Method in Mixed Solvent

Hydrothermal Synthesis of ZnO Superstructures with Controlled Morphology via Temperature and pH Optimization

Sequential Occurrence of ZnO Nanopaticles, Nanorods, and Nanotips During Hydrothermal Process in a Dilute Aqueous Solution

Controlled Synthesis of 1D ZnO Nanostructures Via Hydrothermal Process

A Simple and Novel Low-Temperature Hydrothermal Synthesis of ZnO Nanorods

One-Step Hydrothermal Synthesis of Comb-Like Zno Nanostructures

Hydrothermal Synthesis of Well-Aligned ZnO Nanorod Arrays on Silicon

Alignment-controlled Hydrothermal Growth of Well-Aligned ZnO Nanorod Arrays

Controllable Morphology of ZnO Nanostructures Via a Solvothermal Route

Facile and Controllable Growth of ZnO 1D Nanostructure Arrays on Zn Substrate by Hydrothermal Process

Hydrothermal synthesis of zinc oxide powders with different morphologies

Hydrothermal synthesis of zinc oxide powders with controllable morphology

A Facile Hydrothermal Preparation and Photoluminescence Study of ZnO Micro/nanostructures on Zn Foils

Hydrothermal Growth of ZnO Nanowire Arrays: Fine Tuning by Precursor Supersaturation

Single-Step Hydrothermal Synthesis of Zinc Oxide Micro/Nanostructures

Hydrothermal Synthesis and Optical Properties of ZnO Nanostructured Films Directly Grown From/on Zinc Substrates

Purposed Built ZnO/Zn5(OH)8Ac2·2H2O Architectures by Hydrothermal Synthesis