Abstract:Zinc oxide, as a widely used material in optics, electronics, and medicine, requires a complete overview of different conditions for facile and easily reproducible syntheses. Two types of optimization of ZnO hydrothermal preparation from zinc acetate and sodium hydroxide solution are presented, which allowed for obtaining miscellaneous morphologies of materials. The first was a temperature-controlled synthesis from 100 to 200 °C, using citric acid as a capping agent. The formation of hexagonal rods at the lowest temperature was evidenced, which agglomerated to flower-like structures at 110 and 120 °C. It was followed by transformation to flake-like roses at 160 °C, up to disordered structures composed of nanosized plates (>180 °C). The transformations were generated through a temperature change, which had an impact on the diffusion effect of hydroxide and citrate complexes. The second optimization was the hydrothermal synthesis free of organic additives and it included only a pH variation from 7.5 to 13.5. It was found that by utilizing a slow-dropping process and varying amounts of NaOH solutions, it is possible to obtain well-formed hexagonal pellets at pH 8.0-8.5. Strongly basic conditions of pH 11.0 and 13.5 impeded superstructure formations, giving small elongated particles of ZnO. All samples were characterized by high phase purity and crystallinity, with a specific surface area of 18-37 m2/g, whereas particle size distribution indicated a predominance of small particles (<1 μm).

Single-Step Hydrothermal Synthesis of Zinc Oxide Micro/Nanostructures

A Simple and Novel Low-Temperature Hydrothermal Synthesis of ZnO Nanorods

Microwave-Assisted Rapid Synthesis Of Zno Hexagonal Quasi-Hourglasses

Conversion of large-scale oriented ZnO rod array into nanotube array under hydrothermal etching condition via one-step synthesis approach

Morphology Investigation of Hydrothermally Prepared ZnO Micro-Crystals Influenced by Cu2+ Ions

Sequential Occurrence of ZnO Nanopaticles, Nanorods, and Nanotips During Hydrothermal Process in a Dilute Aqueous Solution

One-Step Hydrothermal Synthesis of Comb-Like Zno Nanostructures

Hydrothermal Synthesis and Characterization of Zirconia Nanocrystallites

Controlled Synthesis of 1D ZnO Nanostructures Via Hydrothermal Process

Hydrothermal Synthesis of ZnO Superstructures with Controlled Morphology via Temperature and pH Optimization

Systematic synthesis of ZnO nanostructures.

Supercritical hydrothermal synthesis of nano-zinc oxide: Process and mechanism

Synthesis of Single-Crystalline Pb(Zr0.52Ti0.48)O-3 Nanocrystals by Hydrothermal Method

Recent Progress in Hydrothermal Synthesis of Zinc Oxide Nanomaterials

Hydrothermal synthesis and characterization of Zinc Oxide nanoparticles of various shapes under different reaction conditions

Efficient, One-Step Mechanochemical Process for the Synthesis of ZnO Nanoparticles

High Efficient and Reproducible Sonochemical Synthesis of ZnO Nanocrystals

Hydrothermal Synthesis and Optical Properties of ZnO Nanostructured Films Directly Grown From/on Zinc Substrates

Monoclinic zirconium oxide nanostructures synthesized by a hydrothermal route

Supercritical hydrothermal synthesis of nano-ZnO: Effects of key parameters and reaction mechanism